PCD-Customs-Tools

More documents

Recommendations

Info

DIA flush milling cutter with diamond sanding ring below NL51mmpkd-sonderwerkzeuge.de/Oberfraeser/DIA-Buendig-Z2-NL53-859.htmlDIA trimming cutter with guide ring below for hand routers for CFRPcarbon fiber and fiberglass panelsTechnical detailsDiameter D: 12.7mmUsable length B: 51 mmShank d: 12x38mmTotal length L: 111.5Cutting: sanded diamondType of abrasive: D427Cutting edge geometry: 4 cooling slotsSuitable for joining and flush milling of CFRP or carbon fiber glass protrusionsSuitable for use in a hand router or underfloor router
DIA flush milling cutter with guide ring Z 2 45 ° bevelpkd-sonderwerkzeuge.de/Oberfraeser/DIA-Buendig-Z2-Fase-45--.htmlDIA flush milling cutter with guide ring for hand router 45 ° bevelTechnical detailsDiameter: 12mm increasing 32mmUsable length 10 mmShank: 8x30mmTotal length: 55Number of cutting edges: 2PCD equipment: 3 mmSpeed: n - max: 30,000Cutting geometry: pullingSuitable for joining, formatting in joinery, plywood,Chipboard or MDF, raw or paper, melamine,HPL or veneer-coated panels.Suitable for use in a hand router or underfloor router
Page 1 and 2:
Automatically generated e-Catalog P
Page 3 and 4:
That happens in usually 2% of the f
Page 5 and 6:
Alternatives to the 3 jaw chuckHydr
Page 7 and 8:
Reducing sleeve D = 12 mm .pkd-sond
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Collet ER 40 (472E) .pkd-sonderwerk
Page 15 and 16:
Collet chuck ER 25 HSK63F .pkd-sond
Page 17 and 18:
Collet chuck ER 32 HSK63Fpkd-sonder
Page 19 and 20:
Collet chuck ER 50 HSK63Fpkd-sonder
Page 21 and 22:
Collet chuck HSK 63 F including acc
Page 23 and 24:
Face milling cutterMilling cutters
Page 25 and 26:
Engraving cutter or cut out corners
Page 27 and 28:
Ball roughing cutter D = 20mmpkd-so
Page 29 and 30:
The grooves become less when either
Page 31 and 32:
Aerotech dust-free CNC machining -
Page 33 and 34:
AER 35A HSK63 105mmpkd-sonderwerkze
Page 35 and 36:
Aerotech Hydro D16 - Nesting Chipbo
Page 37 and 38:
Aerotech Hydro D25 - wood-based mat
Page 39 and 40: Aerotech Hydro D25 + separatorpkd-s
Page 41 and 42: Aerotech Hydro Plus AER41F D105pkd-
Page 43 and 44: Aerotech System 7 wings - plasterbo
Page 45 and 46: Aerotech System 9 wings - nesting o
Page 47 and 48: The Aerotech System is a monolithic
Page 49 and 50: JEC innovation for composite proces
Page 51 and 52: Relief and support of existing suct
Page 53 and 54: Aerotech Universal + Separator - Pa
Page 55 and 56: PCD drills and PCD countersinkspkd-
Page 57 and 58: Hardware drill with chip breaker D
Page 59 and 60: D40 countersink drill bit for plywo
Page 61 and 62: Diamond drill 3mm with clamping sur
Page 63 and 64: For sensitive surfaces and high cut
Page 65 and 66: Milling cutter with countersink D12
Page 67 and 68: PCD drill D10 for carbon with coola
Page 69 and 70: PCD drill D9.5pkd-sonderwerkzeuge.d
Page 71 and 72: PCD countersink 90 ° - D 2.5pkd-so
Page 73 and 74: PCD full head drill Z 2 with coolan
Page 75 and 76: PCD full head drill Z 3 with coolan
Page 77 and 78: HSS drill bit HM equipped with or w
Page 79 and 80: Fig. 1This is also an advantage for
Page 81 and 82: Specialty:The advantage of a PCD mi
Page 83 and 84: Suitable for use in a hand router o
Page 85 and 86: Also for flush milling of CFRP or c
Page 87 and 88: Specialty:The advantage of a PCD mi
Page 89: Specialty:The advantage of a PCD mi
Page 93 and 94: DIA flush milling cutter with guide
Page 95 and 96: DIA flush milling cutter with guide
Page 97 and 98: DIA router Z 2 NL 25 shank 8mmpkd-s
Page 99 and 100: DIA trimming cutter with guide ring
Page 105 and 106: Individual face milling cutters up
Page 107 and 108: Face milling cutter D80 Z4 for comp
Page 109 and 110: Face milling cutter D80 Z8 for alum
Page 111 and 112: Face milling cutter D120 Z4 - posit
Page 113 and 114: Face milling cutter D180 Z8 - incl.
Page 115 and 116: D220 Z 4 face milling cutter includ
Page 117 and 118: Face milling cutter D 300, Z2 inclu
Page 119 and 120: Face milling cutter for carbon / co
Page 121 and 122: Face milling cutter for V = 60 m /
Page 123 and 124: PCD saw blades for difficult materi
Page 125 and 126: 4 + 1 - saw blade D210 Z60 FZ, WZpk
Page 127 and 128: 4 + 1 saw blade D300 Z84 FZ, WZpkd-
Page 129 and 130: Diamond cutting disc D250mm carbon
Page 131 and 132: Diamond saw 300x2.2 / 1.3x30 Z 60 W
Page 133 and 134: Diamond saw D300 Z 12 WZ, cutting w
Page 135 and 136: Diamond saw fiber cement - FR / TR
Page 137 and 138: Whisper saw for Eternitpkd-sonderwe
Page 139 and 140: Why nesting saw?As a rule, a "stand
Page 141 and 142:
The lamella groove is milled with t
Page 143 and 144:
PCD combination saw D 280 Z 60 WZ c
Page 145 and 146:
PCD saw D 350, Z 48, WZ for circula
Page 147 and 148:
SpecialtyPCD mixture for composites
Page 149 and 150:
Saw blade D300 Z32 WZpkd-sonderwerk
Page 151 and 152:
This saw blade can be re-sharpened
Page 153 and 154:
Small money, big performance PCD jo
Page 155:
Double end tenoner - hogger Z 72 wi
Page 158 and 159:
Jointing cutter D125 Z3 + 3 TH 34pk
Page 160 and 161:
Jointing cutter D180 Z2 + 2pkd-sond
Page 162 and 163:
Jointing cutter D180 Z2 + 2 TH 35pk
Page 164 and 165:
Jointing cutter D180 Z3 + 3 TH29pkd
Page 166 and 167:
Specialty:Also available with other
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Combination chipper with saw for do
Page 177 and 178:
Compact hogger Z 6, D 80, width 10.
Page 179 and 180:
Hogger Z 60 width 26 mm with flange
Page 181 and 182:
Fold 90 ° V groove cutter / chamfe
Page 183 and 184:
135 ° -137 ° groove cutter / Aluc
Page 185 and 186:
Flattening cutter for MDFpkd-sonder
Page 187 and 188:
Specialty:Due to the overhang, a th
Page 189 and 190:
Rebate cutter (HSK20C) for plasterb
Page 191 and 192:
Rebate with bevel (HSK20C) for plas
Page 193 and 194:
Bevel shoulder lower edge (HSK20C)
Page 195 and 196:
Chamfer cutter for aluminum D10 NL2
Page 197 and 198:
Folding & miter cutter Z2 + 2 for w
Page 199 and 200:
Folding cutter 90 ° for folding ch
Page 201 and 202:
Folding cutter for nesting Z2 + 2 -
Page 203 and 204:
Format milling cutter D 16 NL 26 -
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
This milling cutter can also be man
Page 211 and 212:
Page 213 and 214:
Milling cutter D6 NL 5 carbon / fib
Page 215 and 216:
Milling cutter D32 with coolant hol
Page 217 and 218:
Milling cutter with countersink D8
Page 219 and 220:
Page 221 and 222:
Jointing cutter (HSK20C) D16 Z3 for
Page 223 and 224:
Jointing cutter (HSK20C) for plaste
Page 225 and 226:
Annotation:Tool shank with interfac
Page 227 and 228:
Also available as Z 3 + 3 on reques
Page 229 and 230:
Slot iron (HSK20C) D50 Z8 for therm
Page 231 and 232:
Fold groove cutter / chamfer cutter
Page 233 and 234:
Groove cutter, flat dowel cutter Z
Page 235 and 236:
Grooving cutter for narrow surfaces
Page 237 and 238:
Grooving cutter (HSK20C) D16, depth
Page 239 and 240:
Groove cutter with shank D12 depth
Page 241 and 242:
Groove cutter "wave" for solid wood
Page 243 and 244:
Groove with a round base (HSK20C) f
Page 245 and 246:
Groove connection cutter for parque
Page 248 and 249:
PCD chamfer cutter 90 ° Z 2pkd-son
Page 250 and 251:
Milling cutter bevel - Z 2 Trespa /
Page 252 and 253:
Profile milling cutter for aluminum
Page 254 and 255:
R6 ball end mill carbon / fiberglas
Page 256 and 257:
R10 ball mill carbon / fiberglasspk
Page 258 and 259:
Heavy metal meets aluminumA heavy m
Page 260 and 261:
Radius cutter R 7 - diamond cutting
Page 262 and 263:
Radius cutter D 110 Z 2 + 2pkd-sond
Page 265 and 266:
Roughing cutter D50 NL50 - positive
Page 267 and 268:
Special milling cutter for aluminum
Page 269 and 270:
Special milling cutter for round sp
Page 271 and 272:
Special milling cutter (HSK20C) con
Page 273 and 274:
Special milling cutter with barrel
Page 275 and 276:
Trowel cutter 45 ° (HSK20C) D16 /
Page 277 and 278:
Trowel cutter 45 ° (HSK20C) D16 /
Page 279 and 280:
Trowel cutter 45 ° with shank D10
Page 281 and 282:
Grooving cutter for plasterboard -
Page 283 and 284:
Grooving cutter with two angles (HS
Page 285 and 286:
Grooving cutter with two angles (HS
Page 287 and 288:
Tool holder for tools with HSK20C a
Page 289 and 290:
Barrel cutter for wood materialspkd
Page 291 and 292:
Trapezoidal cutter with diamond cut
Page 293 and 294:
V-groove cutter (HSK20C) 135 ° - D
Page 295 and 296:
V-groove cutter (HSK20C) D15 depth
Page 297 and 298:
Tool holder for tools with HSK20C a
Page 299 and 300:
Connection cutter spring D47pkd-son
Page 301 and 302:
Tool holder HSK20Cpkd-sonderwerkzeu
Page 303 and 304:
Z 2 grooving cutter with throat arc
Page 305 and 306:
Note: Due to the size of the millin
Page 307 and 308:
Technical detailsDiameter: 15.4 mmU
Page 309 and 310:
Diameter: 24 mmUsable length: 7.2 m
Page 311 and 312:
Diamond milling cutter PCD Z3 D25 N
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Bevel shoulder top edge (HSK20C) fo
Page 319 and 320:
Chamfer cutter 30 ° Z1pkd-sonderwe
Page 321 and 322:
Chamfer cutter 40 ° Z1 for Trespa
Page 323 and 324:
Diamond mixture for long tool life
Page 325 and 326:
Folding milling cutter for 5-axis C
Page 327 and 328:
High-performance PCD for long tool
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Milling cutter D6 NL 5 carbon / fib
Page 339 and 340:
Milling cutter D16 NL7 for aluminum
Page 341 and 342:
Milling cutter with chamfer for alu
Page 343 and 344:
Page 345 and 346:
Milling cutter Z2 with bevel on bot
Page 347 and 348:
Jointing cutter (HSK20C) for plaste
Page 349 and 350:
Plasterboard milling cutter (HSK20C
Page 351 and 352:
Plasterboard cutter (HSK20C) for pl
Page 353 and 354:
Ball mill (HSK20C) for plasterpkd-s
Page 355 and 356:
Groove cutter - composite (coated h
Page 357 and 358:
Fold groove cutter / chamfer cutter
Page 359 and 360:
Groove cutter, flat dowel cutter Z
Page 361 and 362:
Grooving cutter for narrow surfaces
Page 363 and 364:
Grooving cutter (HSK20C) D16, depth
Page 365 and 366:
Groove cutter with shank D12 depth
Page 367 and 368:
Groove cutter "wave" for solid wood
Page 369 and 370:
Groove with a round base (HSK20C) f
Page 371 and 372:
Groove connection cutter for parque
Page 374 and 375:
PCD chamfer cutter 90 ° Z 2pkd-son
Page 376 and 377:
PCD special tools - quick planning,
Page 378 and 379:
Profile cutter for aluminum - Edge
Page 380 and 381:
R3 ball mill carbon / fiberglasspkd
show all

PCD-Customs-Tools

Create successful ePaper yourself

Delete template?

Save as template?