PCD-Customs-Tools

Aerotech Universal 9 blades - Chipboard & MDF
pkd-sonderwerkzeuge.de/Aerotech/AER31A.html
Cruing Aerotech Universal - For MDF and chipboard
Technical details
Interface to the machine: HSK 63 F - other interfaces are possible.
Outside diameter: 95mm
Length / A dimension: 100 mm + tool protrusion
Number of wings: 9
Tool holder: Collet 6- 16 mm for shaft tools D 6- 16 mm
Air speed: 80 m / s at 18,000 rpm
Cooling capacity through air suction: approx. 80 ° C
Ideal drive-over height: 2 mm
Transmittable torque: 30-160 Nm
CNC machining with the Aerotech Universal
Suitable for grooves and pockets in MDF & chipboard. The Aerotech Universal
enables dust-free nesting. Wood dust and chips are sucked out of the groove by the
air suction.
Tool life is significantly extended by cooling and avoiding multiple chipping of the
chips in the groove. Increase in productivity through less cleaning of the machine /
materials
Independent and flexible tool change through the use of draw-back collets.
Relief and support of existing suction systems
Old weak suction systems are supported and / or relieved by the Aerotech.
- Saving of energy costs or complex retrofitting.