PCD-Customs-Tools

More documents

Recommendations

Info

DP cylinder head drill L 57 mmpkd-sonderwerkzeuge.de/PKD-Bohrer-und-Senker/beschlagbohr/DCG574.htmlHinge hole drill with PCD tippingTechnical detailsDiameter: 15 & 35mmShank: 10x25mmTotal length 57 mmNumber of cutting edges: 2 + V2PCD equipment: 2 mmSpeed: n - max: 18,500Certification tip in HMSuitable for drilling in joinery, plywood,Chipboard or MDF, raw or paper, melamine,HPL or veneer-coated panels.Manually, on CNC or hardware drilling machinesSpecialtyNegatively inclined spores ensure a pulling cut and prevent the top layer fromtearing out over a long period of time - min. 3-4 times the standing compared to HMdrills. Particularly suitable for hard HPL coatings or sensitive surfaces. Additionalchip flow optimization for improved chip removal.
For sensitive surfaces and high cutting forces, please use a cup hinge drill with a chipbreaker.In contrast to HM cup hinge drills, the tool life of slide drills is significantly increased.The diamond cup hinge bits are often used for doors in the kitchen area.The cylinder head drills can be resharpened 1-3 times without losing theircircumference.Other diameters and special dimensions on requestshop@pkd-sonderwerkzeuge.de
Page 1 and 2:
Automatically generated e-Catalog P
Page 3 and 4:
That happens in usually 2% of the f
Page 5 and 6:
Alternatives to the 3 jaw chuckHydr
Page 7 and 8:
Reducing sleeve D = 12 mm .pkd-sond
Page 9 and 10:
Reducing sleeve D = 20 mm .pkd-sond
Page 11 and 12: Reducing sleeve D = 32 mm .pkd-sond
Page 13 and 14: Collet ER 40 (472E) .pkd-sonderwerk
Page 15 and 16: Collet chuck ER 25 HSK63F .pkd-sond
Page 17 and 18: Collet chuck ER 32 HSK63Fpkd-sonder
Page 19 and 20: Collet chuck ER 50 HSK63Fpkd-sonder
Page 21 and 22: Collet chuck HSK 63 F including acc
Page 23 and 24: Face milling cutterMilling cutters
Page 25 and 26: Engraving cutter or cut out corners
Page 27 and 28: Ball roughing cutter D = 20mmpkd-so
Page 29 and 30: The grooves become less when either
Page 31 and 32: Aerotech dust-free CNC machining -
Page 33 and 34: AER 35A HSK63 105mmpkd-sonderwerkze
Page 35 and 36: Aerotech Hydro D16 - Nesting Chipbo
Page 37 and 38: Aerotech Hydro D25 - wood-based mat
Page 39 and 40: Aerotech Hydro D25 + separatorpkd-s
Page 41 and 42: Aerotech Hydro Plus AER41F D105pkd-
Page 43 and 44: Aerotech System 7 wings - plasterbo
Page 45 and 46: Aerotech System 9 wings - nesting o
Page 47 and 48: The Aerotech System is a monolithic
Page 49 and 50: JEC innovation for composite proces
Page 51 and 52: Relief and support of existing suct
Page 53 and 54: Aerotech Universal + Separator - Pa
Page 55 and 56: PCD drills and PCD countersinkspkd-
Page 57 and 58: Hardware drill with chip breaker D
Page 59 and 60: D40 countersink drill bit for plywo
Page 61: Diamond drill 3mm with clamping sur
Page 65 and 66: Milling cutter with countersink D12
Page 67 and 68: PCD drill D10 for carbon with coola
Page 69 and 70: PCD drill D9.5pkd-sonderwerkzeuge.d
Page 71 and 72: PCD countersink 90 ° - D 2.5pkd-so
Page 73 and 74: PCD full head drill Z 2 with coolan
Page 75 and 76: PCD full head drill Z 3 with coolan
Page 77 and 78: HSS drill bit HM equipped with or w
Page 79 and 80: Fig. 1This is also an advantage for
Page 81 and 82: Specialty:The advantage of a PCD mi
Page 83 and 84: Suitable for use in a hand router o
Page 85 and 86: Also for flush milling of CFRP or c
Page 91 and 92: DIA flush milling cutter with guide
Page 97 and 98: DIA router Z 2 NL 25 shank 8mmpkd-s
Page 99 and 100: DIA trimming cutter with guide ring
Page 105 and 106: Individual face milling cutters up
Page 107 and 108: Face milling cutter D80 Z4 for comp
Page 109 and 110: Face milling cutter D80 Z8 for alum
Page 111 and 112: Face milling cutter D120 Z4 - posit
Page 113 and 114:
Face milling cutter D180 Z8 - incl.
Page 115 and 116:
D220 Z 4 face milling cutter includ
Page 117 and 118:
Face milling cutter D 300, Z2 inclu
Page 119 and 120:
Face milling cutter for carbon / co
Page 121 and 122:
Face milling cutter for V = 60 m /
Page 123 and 124:
PCD saw blades for difficult materi
Page 125 and 126:
4 + 1 - saw blade D210 Z60 FZ, WZpk
Page 127 and 128:
4 + 1 saw blade D300 Z84 FZ, WZpkd-
Page 129 and 130:
Diamond cutting disc D250mm carbon
Page 131 and 132:
Diamond saw 300x2.2 / 1.3x30 Z 60 W
Page 133 and 134:
Diamond saw D300 Z 12 WZ, cutting w
Page 135 and 136:
Diamond saw fiber cement - FR / TR
Page 137 and 138:
Whisper saw for Eternitpkd-sonderwe
Page 139 and 140:
Why nesting saw?As a rule, a "stand
Page 141 and 142:
The lamella groove is milled with t
Page 143 and 144:
PCD combination saw D 280 Z 60 WZ c
Page 145 and 146:
PCD saw D 350, Z 48, WZ for circula
Page 147 and 148:
SpecialtyPCD mixture for composites
Page 149 and 150:
Saw blade D300 Z32 WZpkd-sonderwerk
Page 151 and 152:
This saw blade can be re-sharpened
Page 153 and 154:
Small money, big performance PCD jo
Page 155:
Double end tenoner - hogger Z 72 wi
Page 158 and 159:
Jointing cutter D125 Z3 + 3 TH 34pk
Page 160 and 161:
Jointing cutter D180 Z2 + 2pkd-sond
Page 162 and 163:
Jointing cutter D180 Z2 + 2 TH 35pk
Page 164 and 165:
Jointing cutter D180 Z3 + 3 TH29pkd
Page 166 and 167:
Specialty:Also available with other
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Combination chipper with saw for do
Page 177 and 178:
Compact hogger Z 6, D 80, width 10.
Page 179 and 180:
Hogger Z 60 width 26 mm with flange
Page 181 and 182:
Fold 90 ° V groove cutter / chamfe
Page 183 and 184:
135 ° -137 ° groove cutter / Aluc
Page 185 and 186:
Flattening cutter for MDFpkd-sonder
Page 187 and 188:
Specialty:Due to the overhang, a th
Page 189 and 190:
Rebate cutter (HSK20C) for plasterb
Page 191 and 192:
Rebate with bevel (HSK20C) for plas
Page 193 and 194:
Bevel shoulder lower edge (HSK20C)
Page 195 and 196:
Chamfer cutter for aluminum D10 NL2
Page 197 and 198:
Folding & miter cutter Z2 + 2 for w
Page 199 and 200:
Folding cutter 90 ° for folding ch
Page 201 and 202:
Folding cutter for nesting Z2 + 2 -
Page 203 and 204:
Format milling cutter D 16 NL 26 -
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
This milling cutter can also be man
Page 211 and 212:
Page 213 and 214:
Milling cutter D6 NL 5 carbon / fib
Page 215 and 216:
Milling cutter D32 with coolant hol
Page 217 and 218:
Milling cutter with countersink D8
Page 219 and 220:
Page 221 and 222:
Jointing cutter (HSK20C) D16 Z3 for
Page 223 and 224:
Jointing cutter (HSK20C) for plaste
Page 225 and 226:
Annotation:Tool shank with interfac
Page 227 and 228:
Also available as Z 3 + 3 on reques
Page 229 and 230:
Slot iron (HSK20C) D50 Z8 for therm
Page 231 and 232:
Fold groove cutter / chamfer cutter
Page 233 and 234:
Groove cutter, flat dowel cutter Z
Page 235 and 236:
Grooving cutter for narrow surfaces
Page 237 and 238:
Grooving cutter (HSK20C) D16, depth
Page 239 and 240:
Groove cutter with shank D12 depth
Page 241 and 242:
Groove cutter "wave" for solid wood
Page 243 and 244:
Groove with a round base (HSK20C) f
Page 245 and 246:
Groove connection cutter for parque
Page 248 and 249:
PCD chamfer cutter 90 ° Z 2pkd-son
Page 250 and 251:
Milling cutter bevel - Z 2 Trespa /
Page 252 and 253:
Profile milling cutter for aluminum
Page 254 and 255:
R6 ball end mill carbon / fiberglas
Page 256 and 257:
R10 ball mill carbon / fiberglasspk
Page 258 and 259:
Heavy metal meets aluminumA heavy m
Page 260 and 261:
Radius cutter R 7 - diamond cutting
Page 262 and 263:
Radius cutter D 110 Z 2 + 2pkd-sond
Page 265 and 266:
Roughing cutter D50 NL50 - positive
Page 267 and 268:
Special milling cutter for aluminum
Page 269 and 270:
Special milling cutter for round sp
Page 271 and 272:
Special milling cutter (HSK20C) con
Page 273 and 274:
Special milling cutter with barrel
Page 275 and 276:
Trowel cutter 45 ° (HSK20C) D16 /
Page 277 and 278:
Trowel cutter 45 ° (HSK20C) D16 /
Page 279 and 280:
Trowel cutter 45 ° with shank D10
Page 281 and 282:
Grooving cutter for plasterboard -
Page 283 and 284:
Grooving cutter with two angles (HS
Page 285 and 286:
Grooving cutter with two angles (HS
Page 287 and 288:
Tool holder for tools with HSK20C a
Page 289 and 290:
Barrel cutter for wood materialspkd
Page 291 and 292:
Trapezoidal cutter with diamond cut
Page 293 and 294:
V-groove cutter (HSK20C) 135 ° - D
Page 295 and 296:
V-groove cutter (HSK20C) D15 depth
Page 297 and 298:
Tool holder for tools with HSK20C a
Page 299 and 300:
Connection cutter spring D47pkd-son
Page 301 and 302:
Tool holder HSK20Cpkd-sonderwerkzeu
Page 303 and 304:
Z 2 grooving cutter with throat arc
Page 305 and 306:
Note: Due to the size of the millin
Page 307 and 308:
Technical detailsDiameter: 15.4 mmU
Page 309 and 310:
Diameter: 24 mmUsable length: 7.2 m
Page 311 and 312:
Diamond milling cutter PCD Z3 D25 N
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Bevel shoulder top edge (HSK20C) fo
Page 319 and 320:
Chamfer cutter 30 ° Z1pkd-sonderwe
Page 321 and 322:
Chamfer cutter 40 ° Z1 for Trespa
Page 323 and 324:
Diamond mixture for long tool life
Page 325 and 326:
Folding milling cutter for 5-axis C
Page 327 and 328:
High-performance PCD for long tool
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Milling cutter D6 NL 5 carbon / fib
Page 339 and 340:
Milling cutter D16 NL7 for aluminum
Page 341 and 342:
Milling cutter with chamfer for alu
Page 343 and 344:
Page 345 and 346:
Milling cutter Z2 with bevel on bot
Page 347 and 348:
Jointing cutter (HSK20C) for plaste
Page 349 and 350:
Plasterboard milling cutter (HSK20C
Page 351 and 352:
Plasterboard cutter (HSK20C) for pl
Page 353 and 354:
Ball mill (HSK20C) for plasterpkd-s
Page 355 and 356:
Groove cutter - composite (coated h
Page 357 and 358:
Fold groove cutter / chamfer cutter
Page 359 and 360:
Groove cutter, flat dowel cutter Z
Page 361 and 362:
Grooving cutter for narrow surfaces
Page 363 and 364:
Grooving cutter (HSK20C) D16, depth
Page 365 and 366:
Groove cutter with shank D12 depth
Page 367 and 368:
Groove cutter "wave" for solid wood
Page 369 and 370:
Groove with a round base (HSK20C) f
Page 371 and 372:
Groove connection cutter for parque
Page 374 and 375:
PCD chamfer cutter 90 ° Z 2pkd-son
Page 376 and 377:
PCD special tools - quick planning,
Page 378 and 379:
Profile cutter for aluminum - Edge
Page 380 and 381:
R3 ball mill carbon / fiberglasspkd
show all

PCD-Customs-Tools

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?