UC4™ Total Control™ Quick Guide - NORAC Systems
UC4™ Total Control™ Quick Guide - NORAC Systems
UC4™ Total Control™ Quick Guide - NORAC Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Table 1 – Examples of Normal Operating Screens<br />
3.2 CHANGING TO AUTOMATIC OR MANUAL MODE<br />
• From the Normal Operating Screen toggle the control panel "AUTO"<br />
switch to change between MANUAL and AUTO modes<br />
• In MANUAL mode, the boom may be controlled as usual with the<br />
boom control switches on the sprayer’s multifunction handgrip<br />
• Operating the sprayer’s left or right boom control switches while in<br />
AUTO mode immediately causes that boom to revert to MANUAL<br />
mode.<br />
- the sprayer’s joystick switches override automatic height control<br />
on either the left, right, or both sides<br />
• To return to AUTO mode the "AUTO (YES)" switch must be<br />
activated.<br />
• The target height (Section 3.3) can be adjusted by momentarily<br />
pressing the sprayer’s main lift control switches (main up or main<br />
down).<br />
• Pressing and holding the sprayer’s main up or down switches for more<br />
4
Change language