Performance Verification Test Record - LeCroy
Performance Verification Test Record - LeCroy
Performance Verification Test Record - LeCroy
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WaveLink Series Differential Probe (13-25 GHz)<br />
1. Remove the old resistor tip and any remaining solder from the long solder pad using a<br />
fine tip soldering iron taking care not to de-solder the SMT resistors.<br />
2. Use a soldering iron to pre-tin the pad. Wash the area with isopropyl alcohol to remove<br />
any residual flux.<br />
3. Align the damping resistor lead with the end of the tin pad and solder in place running<br />
the lead along the pad and over the via. Avoid using excessive amounts of solder. Use the<br />
photographs in this topic as a reference for the proper amount of solder.<br />
WL-HBW-OM-E RevC 48
Change language