You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CRAFTED WHEELS<br />
These beautifully crafted wheels will give years of service and<br />
pleasure to the owner who wants the best workmanship on his<br />
yacht, work boat, or fishing boat. These are not mass production<br />
wheels, but are all hand made from throroughly seasoned stock,<br />
carefully selected for matching grain and color. Rims and felloes<br />
are rigidly secured by brass fastening capped with holly plugs.<br />
Each spoke is hand fitted so the wheel cannot loosen at the hub,<br />
an important feature not found on production wheels.<br />
Overall diameter<br />
wheel sizes<br />
Inches 1 cm<br />
Teak Rim<br />
Fig 687<br />
Teak<br />
Yacht Wheel<br />
Fig 601C<br />
Teak Yacht<br />
Wheel with teak<br />
rim installed Fig 603<br />
20150.8<br />
6 lbs12.7k<br />
6 Spoke<br />
22155.8 1.7 lbs1.77k<br />
7 1b13.2 6 Spoke<br />
24160.9<br />
8 lbsl3.6k<br />
6 Spoke<br />
26166.0 1.9 lbs1.86k<br />
9 1b14.1 6 Spoke<br />
28171.1 16 IbsR.2k 8 Spoke<br />
30176.2 1.11 Ibsl.5k<br />
32181.2 20 ibsl9k<br />
34186.1 2.0 Ibsl.9k<br />
<strong>36</strong>191.4 22 IbsllOk<br />
38199.0<br />
401101.6<br />
2.5 Ibsll.l3k<br />
1 26 Ibsll l.7k I<br />
23 lbl10.5<br />
'I,<br />
421106.6 ( 28 lb113 11<br />
Note: Unless otherwise specified - all wheels will be furnished with<br />
1 "12.54cm bore size. 2-318"/6cm hub length, and 1/4 "11.9cm key size.<br />
Note: These hand-crafted wheels are made for each specific order. allow<br />
approximately 2 weeks lead time.<br />
FIG 601 & 603 - Teak Yacht Wheels - Have a highly polished<br />
chrome bronze hub. Fastenings are plugged with handsome holly<br />
bungs. The Fig 601 teak wheels are standard spoked wheels, and<br />
the Fig 603 teak wheels come with a laminated 1 inch diameter<br />
teak rim installed.<br />
FIG 687 Teak Rims - An all teak laminated rim, usually factory<br />
installed on Edson Wheels but available for do-it-yourselfers.<br />
The rims are approximately 1 "12.54cm in diameter and will add a<br />
total of 2"/5cm to the overall wheel diameter. With the rim you<br />
have the warmth of wood and a non-snagging smooth wheel. On<br />
an existing wheel we must know the outside diameter of the<br />
spokes. Rims supplied in 5 sizes shown in above chart. All rims<br />
are supplied unvarnished.<br />
FIG 602 Bronze Spoke Wheel with Teak Handles. For those who<br />
prefer tradition, Edson offers hand cast bronze wheels with teak<br />
handles. These wheels are not mass produced and the surfaces<br />
are subject to variations. See chart on page 3.<br />
FlG.667 Wheel Hubs - For those who prefer to make their own<br />
mahogany or teak wheel, Edson will provide the polished bronze<br />
or chrome bronze hub. All wheel hubs will be furnished with a<br />
1 "12.54cm bore, 23/sU/6.03cm hub length, and 1h "/1.91cm key<br />
size, unless otherwise specified. For 20" through 26" wheels,<br />
spokes require 1% "/3.18cm square wood stock and for all larger<br />
sizes 28" through 42" spokes require 13/sn/3.49cm square wood<br />
stock.<br />
SlZE 2<br />
Recommended Hub Size<br />
For Wheels 20" lhru 26"<br />
SlZE 4<br />
Recommended Hub Size<br />
For Wheels 28" lhru 34"<br />
SlZE 6<br />
Recommended Hub Size<br />
For Wheels <strong>36</strong>" thru 42"<br />
Bronze Hub<br />
Fig 6678<br />
4 1bs11.8k<br />
6 lbs12.7k<br />
9 Ibsl4.lk<br />
Chrome Hub<br />
Fig 667C<br />
4 Ibsll.8k<br />
6 lbs12.7k<br />
9 lbsl4.lk<br />
Hub<br />
O.D.<br />
4"<br />
5'/4"<br />
6"<br />
No. of<br />
Spokes<br />
6<br />
8<br />
8<br />
Fig 667 Wheel Hubs<br />
FIG 601 Teak Wheels<br />
\ '4<br />
LI<br />
FIG 602 Bronze<br />
Spoke Wheel<br />
@ with Teak Handles<br />
DESTROY E P WHEELS<br />
The most popular of all Edson Steering Wheels was originated -.<br />
by Edson and is a registered Trade Mark of this Corporation.<br />
Edson offers four models including the stainless steel wheel the<br />
vinyl coated wheel, the leather covered stainless steel wheel and<br />
the teak rim wheel. Being smooth, they do not catch clothing and<br />
with their lightness are very sensitive and eliminate the flywheel<br />
effect of the heavier wheels. With the Fig. 698 wheel adapter and<br />
our ability to manufacture virtually all specials, these wheels are<br />
adaptable to most all makes of <strong>steerer</strong>s. Wheel sizes 18" to 40"<br />
are six spoke wheels; 44" to 72" and larger are 8 spoke. Larger<br />
sizes are available upon request.<br />
Wheel Sizes<br />
lncheslcm<br />
18145.7<br />
20150.8<br />
22155.8<br />
24160.9<br />
26166<br />
28171.1<br />
30176.2<br />
32181.2<br />
34/85<br />
<strong>36</strong>191.4<br />
38196<br />
Stainless<br />
Steel<br />
Fig. 644s<br />
5 lbs12.3k<br />
5 lbsl2.3k<br />
5 lbsl2.3k<br />
6 lbs12.7k<br />
6 lbsl2.7k<br />
7 IbsI3.l k<br />
8 lbs13.6k<br />
9 lbsl4.l k<br />
10 lbs14.5k<br />
Vinyl<br />
Coated<br />
Fig. 644V<br />
5 lbsl2.3k<br />
8 lbsl3.6k<br />
9 lbsl4.l k<br />
I<br />
Polished I Bronze wl<br />
Bronze Teak Handle Teak Rim<br />
Fig. 644B Fig. 602B<br />
6 lbs12.7k<br />
on request<br />
7 Ibsl3.l k<br />
8 lbs13.6k<br />
10 lbs14.5k<br />
11 lbs14.9k<br />
18 Ibsl8.lk<br />
28 lbs112.6k Note: Wheels are all nominal sizes<br />
601152 1 31 lbs113.9k I and may vary slightly in diameter. I<br />
1 641162 33 Ibsll4.8k I I I I<br />
1 721181 1 35 lbs115.7k I<br />
Note: All wheel will be furnished with 1 "/25.4mm bore size, 2%"6cm hub<br />
length, and % "16.35mm key size unless otherwise specified.<br />
FIG. 6448 Stainless Steel Wheel. The yachtsman's favorite; the<br />
stainless wheel has a gleaming rim of ovalized 1" tubing with<br />
solid stainless spokes for sizes 18" through 48" and hollow stain-<br />
less spokes for sizes 54" through 72". These wheels are<br />
fabricated from the finest stainless steel, they are smooth, highly<br />
polished and lightweight.<br />
FIG. 644V Vinyl Coated 'Aluminum Wheel. A smooth grey vinyl is<br />
coated (fusion bonded) over an aluminum casting to produce this<br />
never hot never cold to the touch, steering wheel.<br />
FIG. 834 Teak Rim Wheel. Edson's custom Teak Rim Destroyer<br />
Wheels come with 1/2 " stainless steel spokes and an all new exclu-<br />
sive stainless steel wheel hub, enabling the spokes to be internally<br />
welded at the hub. The Edson rim is laminated in three thicknesses<br />
of Teak and finished to an easy gripping I1h" diameter. The teak<br />
rim is warm to the touch, beautiful in appearance, and feather<br />
light for the ultimate in feeling. Edson's Teak Rim Wheel is avail-<br />
able in 5 sizes through 38" in diameter. The wheel is delivered<br />
with the rim unfinished ready to be either varnished or treated<br />
with an exterior teak finish. As each wheel is custom made please<br />
allow about 10 days for delivery.<br />
FIG. 733 Leather Covering Kit. For do-it-yourselfers Edson offers<br />
leather kits for new orexisting wheels.The kit includes the leather<br />
covering, pre-waxed sail twine and the needle. All we need is the<br />
correct diameter of the wheel. A strong, simple and quick cross<br />
stitch should be used. For example, a28" wheel can be covered in<br />
about three hours.<br />
FIG. 644SE Leather Covering for New Wheels. The ultimate luxury<br />
- a very soft leather covering that can be applied to all Fig. 644<br />
Stainless or Vinyl Destroyer Wheels. For new wheels with leather<br />
covering sewn on at the factory, see the price page under Fig.<br />
644SE.<br />
FIG. 716 Leather Covering for Your Present Wheel. Send your<br />
wheel to Edson and we will sew the leather covering on for you.<br />
Costs per wheel size are listed under Fig. 716 in the price page.