Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation

More documents

Recommendations

Info

Compressed Air Loud Noise High Voltage Heavy Object Moving Parts Electrostatic Discharge Warnings and Cautions Point air hoses away from body. Always wear approved eye protection. Sound pressure levels may exceed 85 db. Hearing protection is recommended for prolonged exposure at this level. Disconnect power before removing the electronics cover. This equipment weighs approximately 15 – 19 kg (33 – 41 lbs). Do not drop. Mount only with approved hardware. Pinch warning. Keep hands away from moving parts. Electrostatic Discharge (ESD) may cause damage. Discharge static against a common ground. 14 ProLINE-RoadRunner Operator’s <strong>Guide</strong> A
Chapter 2 Installation 15 ProLINE-RoadRunner Operator’s <strong>Guide</strong> A Mounting on the Assembly Machine...... 16 Connecting the Communications Cable (optional).......18 Connecting Power and Air ...... 20 Turning the Power On ...... 22
Page 1 and 2: PN 096-0440-001A English ProLINE-Ro
Page 3 and 4: Chapter 1 Overview 1 ProLINE-RoadRu
Page 5 and 6: Programming Jobs Statistics Jobs an
Page 7 and 8: 1 5 ProLINE-RoadRunner Operator’s
Page 9 and 10: 3 Control Panel Buttons 7 ProLINE-R
Page 11 and 12: Job continued End Remaining Devices
Page 13 and 14: Socket Socket 1: Enabled Socket 2:
Page 15: Robot Diags Robot: Enabled Run Job/
Page 19 and 20: SMT attaches here 17 ProLINE-RoadRu
Page 21 and 22: 2 19 ProLINE-RoadRunner Operator’
Page 23 and 24: 3 Pull Collar 21 ProLINE-RoadRunner
Page 25 and 26: Chapter 3 Job Setup 23 ProLINE-Road
Page 31 and 32: 29 ProLINE-RoadRunner Operator’s
Page 35 and 36: 6 3 4 33 ProLINE-RoadRunner Operato
Page 37 and 38: 35 ProLINE-RoadRunner Operator’s
Page 39 and 40: Adding Network Communication 3 •
Page 41 and 42: Chapter 4 Operation 39 ProLINE-Road
Page 43 and 44: Job Advance Pocket Align Pocket Pau
Page 47 and 48: 4 3 Emptying Cover Tape 45 ProLINE-
Page 49 and 50: 5 6 47 ProLINE-RoadRunner Operator
Page 51 and 52: Chapter 5 Maintenance 49 ProLINE-Ro
Page 53 and 54: 1 Cleaning with Alcohol 51 ProLINE-
Page 55 and 56: Chapter 6 Troubleshooting 53 ProLIN
Page 57 and 58: Stop Caution Motor Controller not r
Page 59 and 60: 3 3 Removing Jammed Device Tape 57
Page 61 and 62: A Actuator Plate, changing 28 Adapt
Page 63 and 64: operator 8-9 supervisor 10-13 symbo
Page 65 and 66: Contact your local Data I/O represe

Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation

Create successful ePaper yourself

Delete template?

Save as template?