Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Job<br />
Advance Pocket<br />
Align Pocket<br />
1<br />
42 ProLINE-RoadRunner Operator’s <strong>Guide</strong> A<br />
2<br />
Ending a Job<br />
View<br />
Results<br />
> End<br />
Whenever you want to change job<br />
cards, you must first end the<br />
current job.<br />
To end the current job:<br />
1. Press the Pause button.<br />
2. Scroll to and select End from<br />
the Job Menu. “Job” is in the<br />
main menu.<br />
The system will finish<br />
processing devices and place<br />
the devices on the belt, but no<br />
additional devices will get<br />
picked from the tape.
Change language