Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Job<br />
Advance Pocket<br />
Align Pocket 3<br />
1<br />
Running the Self-Test<br />
52 ProLINE-RoadRunner Operator’s <strong>Guide</strong> A<br />
Run the Self-test procedure<br />
approximately once a week.<br />
To run the Self-test procedure:<br />
1. Press Pause or end a job if<br />
running.<br />
2. Clear all devices from the<br />
sockets and from the conveyor<br />
belt.<br />
3. Toggle the power switch Off and<br />
then back On.<br />
The Self-test will run, checking<br />
the condition of the<br />
components.<br />
4. Check the display for system<br />
errors. �
Change language