Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
Siemens SIPLACE X-Series Operator's Guide - Data I/O Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting the Communications Cable<br />
1<br />
Red Dot<br />
18 ProLINE-RoadRunner Operator’s <strong>Guide</strong> A<br />
To connect the Communications<br />
Cable:<br />
1. Correctly orient the connector<br />
(the red dot will be on top) and<br />
plug it into RoadRunner.<br />
The socket is located on the far<br />
side—facing the SMT feeder<br />
table.<br />
continued