USER'S GUIDE - ShipWeight

Additional features
Directly below this, there is a checkbox to tell if the value has decimals not
separated by a dot. If so, there is also a spin box to indicate the number of
decimals.
To show or hide advanced settings for the data file, click the ‘Advanced>>>’
button. The advanced settings are used to define is the indicator field. An
indicator field means that we have a number followed by a character, i.e.
23.4A, where the character indicates if the value should be read in as
negative or positive value. If there is no indicator field, you simply select
‘None’. Otherwise, you should select the direction and the character of the
indicator field. The default indicators are:
X-direction: F (fore) = Positive
A (aft) = Negative
Y-direction: P (portside) = Positive
S (starboard) = Negative
Z-direction: B (below) = Negative
A (above) = Positive
At the bottom of the Advanced settings area, you can specify a code e.g.
[C01] to hold the value ‘S’ to indicate negative weights.
When all the correct settings have been selected, click “Add” button to register
the import rule.
Any selected row in the definition can be delete or edited by selecting the
“Delete” button or the “Edit” button when changing it.
To change the order of the rows, select a row and press the ‘Move up’ or
‘Move down’ buttons.
4-46
ShipWeight – User’s Guide, version 10.0, April 2011