USER'S GUIDE - ShipWeight

Weight Monitoring
2.6.15 Auto CoG
The ‘Auto CoG’ function will automatically define CoG and extension for
weight items. The CoG and extension values are based on code-values.
The ‘Auto CoG’ function is turned on/off on the Item tab-sheet of the Options
dialog. In the Options dialog you also specify which code type the CoG will be
calculated from.
For the ‘Auto CoG’ function to work properly, the code type selected as basis
for ‘Auto CoG’ must include code values. For each code value, VCG_min,
VCG_max, LCG_min, LCG_max, TCG_min, TCG_max must be defined.
To define an ‘Auto CoG’ code, open the Code Definition dialog window. Add a
code type, e.g. C05. Make sure FieldType is set to ‘Listbox.’
2-28
ShipWeight – User’s Guide, version 10.0, April 2011