USER'S GUIDE - ShipWeight

More documents

Recommendations

Info

Introduction 1.3 Contact information If you have any questions regarding ShipWeight, please do not hesitate to contact us. BAS engineering AS Myrabakken Næringssenter Phone: + 47 70 15 03 60 N-6010 Ålesund Fax: + 47 70 14 24 91 Norway Email: office@bas.no For our representatives outside Norway, please see www.shipweight.com 1-2 ShipWeight – User’s Guide, version 10.0, April 2011
Introduction 1.4 General view of the ShipWeight system The ShipWeight system serves two main purposes: Weight monitoring and estimation. During the weight monitoring process, data from weight take off during construction is structured and stored together with relevant parameters for the items. When the vessel is complete and the weight data is corrected according to the results from the inclining test report, the ship is ready to be exported to the ship database. As long as the weight monitoring of a project is ongoing, the data is stored in a project database, and cannot be used for estimation. The project database can contain several projects, and is separated from the ship database to prevent doing estimates based on incomplete vessel data. When a project in the project database is complete, the data should be exported to the ship database. The ship database should contain data from all completed projects. When a new estimation project is started, estimation can be done on basis of the past ship data in the ship database. Usually the estimation progress continues until a construction contract is signed and there is a contract weight to relate to. Then a new ShipWeight project should be created and you can start weight control activities and weight take off. During the weight control activities, the project file can be compared to the design project file to find deviations and to measure the progress in the project. When the project is complete, a new file is ready to enter the ship database, and the experience basis of past ship data has increased. As more and more projects are exported to the ship database, the better the system will be to estimate new vessels. 1-3 ShipWeight – User’s Guide, version 10.0, April 2011
Page 1 and 2: USER’S GUIDE Version 10.0
Page 3 and 4: 2.7.2 Using Worksets with the Playg
Page 5 and 6: 5.1.3 Quantity ....................
Page 7: Introduction 1 Introduction 1.1 Abo
Page 11 and 12: Introduction The ShipWeight standar
Page 13 and 14: Weight Monitoring 2 Weight Monitori
Page 15 and 16: Weight Monitoring In the right part
Page 17 and 18: Weight Monitoring 2.2 Creating a ne
Page 19 and 20: Weight Monitoring GA-filename: The
Page 21 and 22: Weight Monitoring 2-9 ShipWeight -
Page 23 and 24: Weight Monitoring 2.4 Moving throug
Page 25 and 26: Weight Monitoring 2.5 Finding the r
Page 27 and 28: Weight Monitoring The toolbar inclu
Page 29 and 30: Weight Monitoring This way similar
Page 31 and 32: Weight Monitoring Press the Delete
Page 33 and 34: Weight Monitoring 2.6.5 Sorting The
Page 35 and 36: Weight Monitoring 2.6.9 Set field v
Page 37 and 38: Weight Monitoring Title Name of the
Page 39 and 40: Weight Monitoring 2.6.14 Check CoG
Page 41 and 42: Weight Monitoring Click on the new
Page 43 and 44: Weight Monitoring In the items dial
Page 45 and 46: Weight Monitoring 2.6.19 Marking Ch
Page 47 and 48: Weight Monitoring The Items Dialog
Page 49 and 50: Weight Monitoring When clicking OK,
Page 51 and 52: Weight Monitoring Working like this
Page 53 and 54: Weight Monitoring Weight items can
Page 55 and 56: Weight Monitoring 2.8 Making the pr
Page 57 and 58: Weight Monitoring 2.9 Exporting to
Page 59 and 60:
Weight Monitoring 2.11 Reports and
Page 61 and 62:
Weight Monitoring Pressing a print
Page 63 and 64:
Weight Monitoring 2.11.2 Special re
Page 65 and 66:
Weight Monitoring The first thing t
Page 67 and 68:
Weight Monitoring If you leave this
Page 69 and 70:
Weight Monitoring 2.11.3 Weight tra
Page 71 and 72:
Weight Monitoring Code: Set CO code
Page 73 and 74:
Weight Monitoring 2.11.4 Modular We
Page 75 and 76:
Estimating Weight and CoG 3 Estimat
Page 77 and 78:
Estimating Weight and CoG 3.2.1 The
Page 79 and 80:
Estimating Weight and CoG 3.2.2 Exp
Page 81 and 82:
Estimating Weight and CoG 3.2.5 The
Page 83 and 84:
Estimating Weight and CoG The other
Page 85 and 86:
Estimating Weight and CoG 3.5 Savin
Page 87 and 88:
Estimating Weight and CoG 3.5.2 Imp
Page 89 and 90:
Estimating Weight and CoG 3.7 Using
Page 91 and 92:
Estimating Weight and CoG • Impor
Page 93 and 94:
Estimating Weight and CoG also want
Page 95 and 96:
Additional features Weight distribu
Page 97 and 98:
Additional features The dialog will
Page 99 and 100:
Additional features 2. Item with un
Page 101 and 102:
Additional features The user may ch
Page 103 and 104:
Additional features 4-10 ShipWeight
Page 105 and 106:
Additional features 4.1.4 Inserting
Page 107 and 108:
Additional features 4.2 Gyradius Wh
Page 109 and 110:
Additional features 4.3 Comparing p
Page 111 and 112:
Additional features 4.4 The Auto es
Page 113 and 114:
Additional features To retrieve a s
Page 115 and 116:
Additional features 4.5 User define
Page 117 and 118:
Additional features 4.6 Mapping bet
Page 119 and 120:
Additional features In the Item Dia
Page 121 and 122:
Additional features Click OK again
Page 123 and 124:
Additional features 4.8 Move CoG If
Page 125 and 126:
Additional features 4.9 Importing d
Page 127 and 128:
Additional features 4.9.2 Importing
Page 129 and 130:
Additional features Options dialog
Page 131 and 132:
Additional features 4.9.3 Importing
Page 133 and 134:
Additional features While a green c
Page 135 and 136:
Additional features 4.9.5 The Data
Page 137 and 138:
Additional features To delete old w
Page 139 and 140:
Additional features Directly below
Page 141 and 142:
Additional features In example, to
Page 143 and 144:
Additional features 4.9.7 Test Impo
Page 145 and 146:
Additional features Additional data
Page 147 and 148:
Additional features the correct equ
Page 149 and 150:
Additional features 4.10 Changing t
Page 151 and 152:
Additional features Description - e
Page 153 and 154:
Additional features d Integer (lowe
Page 155 and 156:
Additional features Next, please se
Page 157 and 158:
Additional features You can make su
Page 159 and 160:
Additional features Click “Close
Page 161 and 162:
Additional features Click the “Cl
Page 163 and 164:
Additional features CodeType C04 Ti
Page 165 and 166:
Additional features 4-72 ShipWeight
Page 167 and 168:
Additional features Hence a sub cod
Page 169 and 170:
Additional features 4.12.1 To Input
Page 171 and 172:
Additional features 4.13 3D Plot of
Page 173 and 174:
Hints and tricks 5 Administration 5
Page 175 and 176:
Hints and tricks 5.1.3 Quantity The
Page 177 and 178:
Hints and tricks 5.1.5 Log Controls
Page 179 and 180:
Hints and tricks 5.1.7 Item Read on
Page 181 and 182:
Hints and tricks 5.2 The SWLogin-di
Page 183 and 184:
Hints and tricks 5.2.3 The Password
Page 185 and 186:
Hints and tricks 5.2.5 Change your
Page 187 and 188:
Hints and tricks Back in the New Us
Page 189 and 190:
Hints and tricks For each of these
Page 191 and 192:
Hints and tricks 5.3 The Project Se
Page 193 and 194:
Hints and tricks The five buttons a
Page 195 and 196:
Hints and tricks To create a group
Page 197 and 198:
Hints and tricks from the group ‘
Page 199 and 200:
Hints and tricks dialog window, sel
Page 201 and 202:
Hints and tricks 5.5.3 Project and
Page 203 and 204:
Hints and tricks 5.7 Edit Weight Gr
Page 205 and 206:
Hints and tricks 6 to specify icon
Page 207 and 208:
Hints and tricks • To backup a Sh
Page 209 and 210:
Hints and tricks 6 Hints and tricks
Page 211 and 212:
Hints and tricks 6.3 Calculating pa
Page 213 and 214:
Hints and tricks 6.4 Fix item weigh
Page 215 and 216:
Hints and tricks To turn on the sec
Page 217 and 218:
7 Introduction to the databases The
Page 219 and 220:
LCG Longitudinal center of gravity
Page 221 and 222:
Parameters The parameters available
Page 223 and 224:
8 Introduction to Crystal Reports T
Page 225 and 226:
The design area at the right side i
Page 227 and 228:
Next, you should expand the ‘OLE
Page 229 and 230:
For more information on the databas
Page 231 and 232:
When you have selected the data you
Page 233 and 234:
8-11 ShipWeight - User’s Guide, v
Page 235 and 236:
Click ‘Next’ to go to ‘Record
Page 237 and 238:
8.2.2 Filtering data on ProjectID E
Page 239 and 240:
In the formula text window, type th
Page 241 and 242:
8.2.3 Formatting a report The previ
Page 243 and 244:
Back in the main window of Crystal
Page 245 and 246:
8.2.5 Summarizing a Code-field In t
Page 247 and 248:
8-25 ShipWeight - User’s Guide, v
Page 249 and 250:
The ‘Set Datasource Location’ d
Page 251 and 252:
On the next screen, check the ‘In
Page 253 and 254:
In the Field Explorer, you can see
Page 255 and 256:
Click on the text ‘Click to creat
Page 257 and 258:
If there are no sub-reports in your
Page 259 and 260:
INDEX A Addresses;4-54 Adjusted coe
show all

USER'S GUIDE - ShipWeight

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?