laboratory catalogue - Wenk Lab Tec

GENERAL CATALOGUE 2010/11
1
Tube furnaces MTF/CTF/TZF
- maximum operating temperatures of 900°C, 1000°C and 1200°C
- 11 different standard models (MTF and CTF) for choice
- MTF models: tube diameters range from 15 to 38 mm and heated lengths from 130 to 900 mm
- CTF models: tube diameters of 65, 75 and 100 mm, heated lengths of 550, 700 and 900mm
- TZF models: tube diameters range from 38 to 100mm and heated lengths from 400 to 900mm
- integrated ceramic worktube
- can be adapted to allow a non-oxidising atmosphere by fitting an additional work tube and end seals
- thermocouple in separate sheath between worktube and heating element
- mesh guard for low temperatures at the outer case
- these furnaces can optionally be mounted vertically with a separate control box
- controls located in control box (below furnace body)
- digital PID-Controller E301
Type Max.
temp.
MTF 10/15/130
MTF 10/25/130
MTF 12/25/250
MTF 12/25/400
MTF 12/38/250
MTF 12/38/400
CTF 12/65/550
CTF 12/75/700
TZF 12/38/400
TZF 12/65/550
TZF 12/75/700
2 3
Heated
zone
Tube
length
Tube
dia.
Power External
dimensions
(W x D x H)
°C mm mm mm W mm
1000
1000
1200
1200
1200
1200
1200
1200
1200
1200
1200
130
130
250
400
250
400
550
700
400
550
700
150
150
300
450
300
450
600
750
450
600
750
15.0
25.0
25.0
25.0
38.0
38.0
65.0
75.0
38.0
65.0
75.0
400
400
700
1000
1000
1500
2000
3000
1200
1800
3000
Tube furnaces, R 50/250/12 to R 100/1000/13
150 x 175 x 265
150 x 175 x 265
370 x 375 x 375
450 x 375 x 375
370 x 375 x 430
450 x 375 x 430
625 x 360 x 525
775 x 360 x 525
430 x 450 x 375
525 x 775 x 360
775 x 360 x 525
E & OE.
www.wenk-labtec.com
7. Heating and cooling technology
Heating/Ovens, Furnaces
Carbolite
Supplied with tube (Sillmantin 60) and two end stoppers, ensuring that most standard
Nabertherm
procedures can be conducted:
- srainless steel housing
- diameter of tubes from 30 up to 100 mm
- heating zones from 250 up to 1000 mm
- smooth electronic relay switching
- digital PID-controller B 180 as standard
- Additional P330 programmer with 9 programmes and 8 segments
- optional three zone controller C40 as master-control and 2 x zone controller C6z (from 750 mm heating length
onwards in types 1300°C
- available for max. temp 1200 or 1300°C
Type Max. Tube Power Dimensions
temp. dia.
(W x D x H)
°C mm W mm
R 50/250/12/B180
1200 30.0 1200 400 x 240 x 490
R 50/500/12/B180
1200 30.0 1800 650 x 240 x 490
R 50/500/12/B180
1200 40.0 1800 650 x 240 x 490
R 100/750/12/B180
1200 60.0 3600 1000 x 360 x 640
R 100/750/12/B180
1200 80.0 3600 1000 x 360 x 640
R 120/1000/12/B180
1200 100.0 6000 1300 x 420 x 730
R 100/750/13/B180*
1300 60.0 4400 1000 x 360 x 640
R 100/750/13/B180*
1300 80.0 4400 1000 x 360 x 640
R 120/1000/13/B180*
1300 100.0 6500 1300 x 420 x 730
Furnaces are available in other sizes and max. temperatures- details on request.
*These models are also available in 3 zone versions.
1
2
3
PK Cat. No.
1
1
1
1
1
1
1
1
1
1
1
9.764 420
9.764 421
9.764 422
9.764 423
9.764 424
9.764 425
9.764 426
9.764 427
9.764 429
9.764 430
9.764 428
PK Cat. No.
1
1
1
1
1
1
1
1
1
9.764 510
9.764 512
9.764 513
9.764 514
9.764 515
9.764 516
9.764 521
9.764 522
9.764 523
765