laboratory catalogue - Wenk Lab Tec

GENERAL CATALOGUE 2010/11
1
7. Heating and cooling technology
Heating/Incubators, drying cabinets, test chambers, hybridization chambers
Safety drying ovens with first class safety features, FDL
This series presents the perfect environment for solvent-based samples. The interior
BINDER
chamber has a symmetrical airflow with defined flow velocities, free of silicone and dust,
safeguarded by a high-efficiency filter cartridge. FDL therefore complies with all EN 1539 and ISO 3251 requirements
and its programme with intelligent, fresh air monitoring feature offers maximum operator safety.
Performance features and equipment:
- Electronically controlled, APT.line preheating chamber technology
- Complies with all safety requirements according to the standards EN 1539 and VBG 24
- Temperature range of 5°C (9°F) above ambient temperature up to 300°C (572°F)
- MP controller allows easy programming of variable temperature cycles with numerous temperature and time
functions and programmable temperature ramps via programme editor; 2 programmes each with 10 segments,
alternatively switchable to 1 programme with 20 segments
- The time interval of individual segments can be adjusted up to a maximum of 99:59 hours or 999:59 hours. This
applies to all programmes.
- Integrated7-day programme timer with real time function
- Adjustable ramp function via programme editor
- FKM door gasket (for max. temp. of 200°C/392°F)
- Replaceable fresh-air filter cartridge, Class F6 (EU6 fine-particle filter for particle sizes between 1 µm and 10 µm)
- Independent adjustable temperature safety device, Class 2 (DIN 12880), with visible and audible alarms
- Fresh-air monitoring with audible alarm and automatic heat shut-down
- 100 mm (3.9 inch) rear exhaust duct
- RS 422 printer and communication interface for APT-COM DataControlSystem communication software
- 2 chrome-plated shelves
- Binder test certificate
Type Internal
volume
Internal
dimensions
External
dimensions
Description PK Cat. No.
(W x D x H)
(W x D x H)
litres mm mm
FDL 115 115 834 x 685 x 800 115 Standard 1 9.883 580
2 Safety drying ovens with first class safety features and an expanded temperature
range, MDL series
The MDL series operates at temperatures up to 350 ºC at an airflow of 400l/min, ideal
BINDER
conditions for high temperature testing, e.g. in coil coating applications. The preheating
chamber with its special Airflow Design permits homogeneous heat-treatment processes to be performed with
maximum operator safety in an extremely short time, safeguarded by electronic monitoring of incoming air. Individual
programming options provide maximum flexibility for completing your tasks.
Performance features and equipment:
- Electronically controlled APT.line preheating chamber technology
- Temperature range of 5°C (9°F) above ambient temperature up to 350°C (662°F)
- MCS controller with 25 storable programmes of 100 segments each to a maximum of 500
segments
- User-friendly LCD screen
- Easy-to-read menu guide
- Integral electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real-time clock
- Heat output: 9.0 kW
- Silicone door gasket, resistant to high operating temperatures
- Adjustable ramp function via programme editor
- 100 mm (3.9 inch) rear exhaust duct
- Replaceable fresh-air filter cartridge, Class F6 (EU6 fine-particle filter for particle sizes between 1 µm and 10 µm)
- Independent adjustable temperature safety device, Class 2 (DIN 12880) with visible and audible alarms
- Fresh-air monitoring with audible alarm and automatic heat shutdown
- RS 422 interface for APT-COM DataControlSystem communication software
- 2 chrome-plated shelves
- Binder test certificate
Type Internal
volume
Internal
dimensions
External
dimensions
Description PK Cat. No.
(W x D x H)
(W x D x H)
litres mm mm
MDL 115 115 600 x 435 x 435 834 x 685 x 800 Standard 1 9.883 581
E & OE.
www.wenk-labtec.com
1
2
739