laboratory catalogue - Wenk Lab Tec

1
2
7. Heating and cooling technology
Heating/Incubators, drying cabinets, test chambers, hybridization chambers
Type Internal Internal
External
volume dimensions
dimensions
(W x D x H)
(W x D x H)
litres mm mm
MK 53
53 402 x 330 x 402 740 x 740 x 1222
MK 240
240 735 x 434 x 700 1140 x 946 x 1713
MK 720
700 1000 x 600 x 1168 1341 x 987 x 1998
742
E & OE.
www.wenk-labtec.com
GENERAL CATALOGUE 2010/11
1 Temperature test chambers with forced convection and individual programming
testing, M series
Because of its individual programming options and ability to operate at maximum
BINDER
temperatures up to 300°C, the M series is ideally suited for materials testing and aging
tests. The heavy-duty air turbine and a programmable exhaust ventilation flap accelerate heat-up and ensure that the
test temperature is maintained with absolute precision at all levels, with minimal spatial fluctuations; performance as
never before.
Performance features and equipment:
- Electronically controlled APT.line preheating chamber technology
- Temperature range of 5°C (9°F) above ambient temperature up to 300°C (572°F)
- MCS controller with 25 storable programmes of 100 segments each up to a maximum of 500 segments
- User-friendly LCD screen
- Easy-to-read menu guide
- Integral electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real-time clock
- Adjustable ramp function via programme editor
- Programme-controlled ventilation flap
- High air-exchange rate by high-performance fan
- Adjustable fan speed (0 to 100 %)
- Rear exhaust duct, 50 mm (2 inch) dia.
- Independent adjustable temperature safety device, class 2 (DIN 12880), with visible temperature alarm
- RS 422 interface for APT-COM DataControlSystem communication software
- 2 chrome-plated shelves
- Binder test certificate
Type Internal Internal
External
volume dimensions
dimensions
(W x D x H)
(W x D x H)
litres mm mm
M 53
53 400 x 330 x 400 634 x 575 x 779
M 115
115 600 x 400 x 480 834 x 645 x 864
M 240
240 800 x 500 x 600 1034 x 745 x 984
M 400
400 1000 x 500 x 800 1234 x 765 x 1184
M 720
720 1000 x 600 x 1200 1234 x 1692 x 865
2
PK Cat. No.
Environmental simulation chambers for complex temperature profiles, MK series
1
1
1
1
1
9.883 563
9.883 564
9.883 565
9.883 566
9.883 567
This series covers the classic temperature range between -40°C and +180°C for heat
BINDER
and refrigeration tests - with the added benefit of natural simulation by means of
preheating chamber technology and the Horizontal Air Flow Design. Unique technology, developed by Binder. With
these features, the MK series thus meets the highest precision and performance requirements for cyclic temperature
tests and presents an intelligent alternative to expensive individual solutions.
Performance features and equipment:
- Electronically controlled APT.line preheating chamber technology
- Temperature range from -40°C to +180°C (-40°F to +356°F), at an ambient temperature of 25°C/77°F
- MCS controller with 25 storable programmes of 100 segments each up to a maximum of 500 segments
- User-friendly LCD screen
- Easy-to-read menu guide
- Integral electronic chart recorder
- Variety of options for the graphic display of process parameters
- Real-time clock
- Heated viewing window with interior lighting
- Adjustable high-performance fan
- Programmable condensation protection for test material
- Adjustable ramp function via programme editor
- Independent adjustable temperature safety device, Class 2 (DIN 12880), with visible and audible temperature
alarms
- Environmentally friendly refrigerant R 404a
- Ethernet or rather RS 422 interface for APT-COM DataControlSystem communication software
- Access port, 80 mm (3.1 inch) dia., top (MK 53), right and left sides (MK 720), access port, 50 mm (2 inch) dia. left
side (MK 240)
- 2 stainless steel shelves
- Binder test certificate
Description PK Cat. No.
Standard
Standard
Standard
1
1
1
9.883 560
9.883 561
9.883 562