laboratory catalogue - Wenk Lab Tec
laboratory catalogue - Wenk Lab Tec
laboratory catalogue - Wenk Lab Tec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1<br />
2<br />
3<br />
7. Heating and cooling technology<br />
Heating/Hotplates-Block thermostats<br />
772<br />
1<br />
Flask heaters, series heating, KI series<br />
E & OE.<br />
www.wenk-labtec.com<br />
GENERAL CATALOGUE 2010/11<br />
Versatile, 4- or 6-bank heaters with bowl-shaped tubular heating elements and built-in<br />
Gerhardt<br />
stainless steel reflector collars around the apertures for flasks up to 1000 ml. Each<br />
heater position can be individually controlled. With mains switch and pilot light. Particularly suitable for Kjeldahl<br />
analyses. Supplied with mains connection cable. Capacity can be increased using accessories. Not suitable for use<br />
with distillation solvents.<br />
Type Zones Max.<br />
temp.<br />
KI 16<br />
KI 24<br />
KI 26<br />
2<br />
6 x 250 ml<br />
4 x 250 - 1000 ml<br />
6 x 250 - 1000 ml<br />
Power Dimensions<br />
(W x D x H)<br />
°C W mm<br />
600<br />
750<br />
750<br />
AccuBlock TM Digital Dry Baths<br />
1800<br />
2320<br />
3480<br />
600 x 225 x 130<br />
600 x 225 x 130<br />
900 x 225 x 130<br />
PK Cat. No.<br />
1<br />
1<br />
1<br />
9.645 540<br />
9.645 544<br />
9.645 546<br />
The user calibration function allows for easy calibration to in-house standards when<br />
<strong>Lab</strong>net<br />
required.<br />
The dry bath is available as a single or dual block model. Interchangeable blocks are available to accommodate a wide<br />
variety of tubes, plates and slides.<br />
Each dry bath is supplied with a block lifter that enables the user to exchange blocks easily, even when the block is<br />
hot.<br />
- precise microprocessor control<br />
- broad temperature range, to 150°C<br />
- large digital display<br />
- easy user calibration<br />
- single and dual block models<br />
Specifications<br />
Temperature range: Ambient + 5 to 150°C<br />
Temperature resolution: 0.1°C<br />
Temperature uniformity:<br />
±0.2°C<br />
Temperature accuracy<br />
±0.3°C<br />
Temperature control Microprocessor<br />
Block chamber construction Stainless steel<br />
Dimensions (WxDxH) 20 x 26.5 x 8.3cm<br />
Weight 2.2kg<br />
Supply requirements: 230V 50/60Hz, or<br />
120V 50/60Hz<br />
Type PK Cat. No.<br />
AccuBlock Digital Dry Bath, single block<br />
AccuBlock Digital Dry Bath, dual block<br />
AccuBlock TM Digital Dry Baths, Accessories<br />
1<br />
1<br />
6.224 190<br />
6.225 737<br />
<strong>Lab</strong>net<br />
Type PK Cat. No.<br />
Block, 24 x 1.5ml tubes<br />
Block, 20 x 2.0ml tubes<br />
Block, 24 x 0.5ml tubes<br />
Block, 48 x 0.2ml PCR tubes or 6 x 0.2ml strips<br />
Block 12 x 15ml centrifuge tubes<br />
Block 5 x 50ml centrifuge tubes<br />
3<br />
Incubators PCH-1 and PCH-2<br />
Personal benchtop cooling/heating dry block for microcentrifuge tubes. The ingenious<br />
block construction, combined with the powerful Peltier module, produces very rapid<br />
cooling and heating.<br />
Temperature range: -10 to +100°C<br />
Heat up, amb. to 100°C: < 10 min<br />
Cool down, 100°C to amb.: < 12 min<br />
Cool down, amb. to -10°C: < 11 min<br />
1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
6.224 191<br />
6.233 664<br />
6.235 417<br />
9.945 763<br />
9.945 764<br />
9.945 765<br />
Type Type PK Cat. No.<br />
PCH-1<br />
PCH-2<br />
12 x 1.5 ml plus 20 x 0.5 ml tubes<br />
20 x 1.5 ml tubes<br />
1<br />
1<br />
Grant<br />
9.721 009<br />
9.721 010
Change language