laboratory catalogue - Wenk Lab Tec

1
2
3
4
7. Heating and cooling technology
Heating/Incubators
750
1
Trays for Shaking Incubators 3031, 3032 and 3033
Tray 3966 for Shaking Incubator 3031 and GFL Shakers 3011 to 3018
Stainless steel, 450 x 450 mm. With holes to accept clamps for Erlenmeyer flasks and
other acessories.
E & OE.
www.wenk-labtec.com
GENERAL CATALOGUE 2010/11
Tray 3970 for Shaking Incubator 3032
Stainless steel, 450 x 300 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Tray 3980 for Shaking Incubator 3031 and GFL Shakers 3019 to 3020
Anodised aliminium, 670 x 537 mm. With holes to accept clamps for Erlenmeyer flasks and other acessories.
Type For Type PK Cat. No.
Platform 3966
Platform 3970
Platform 3980
2
3031 / 3011 to 3018
3032
3033 / 3019 / 3020
Clamps for Erlenmeyer Flasks
Clamps for Shaking Incubators 3031/3032/3033 with orbital motion, to be screwed
onto trays 3966, 3970 and 3980. Made of stainless steel. Complete with fixing
material (see also GFL Shakers 3005 to 3020).
Type For
flasks
3983
3984
3985
3986
3987
3988
3989
3989
25
50
100
200
250-300
500
1000
2000
Max. clips per
platform refs.
ml 3966/3970/3980
79/52/99
49/33/99
36/22/50
22/15/26
16/13/26
12/10/26
9/6/12
-/3/9
3032 (Shaking tray 3970): Clamps for 300ml and larger: 1 tray only can be used
3033 (Shaking tray 3980): Clamps for 1000ml and larger: 1 tray only can be used
Other clamps on request
3 4
Type Internal
dimensions
(W x D x H)
Mini incubator 4010
Mini roller incubator 4020
Mini Incubator 4010 and Mini Tube Roller Incubator 4020
1
1
1
GFL
9.837 936
9.837 990
9.837 980
GFL
PK Cat. No.
1
1
1
1
1
1
1
1
9.837 983
9.837 984
9.837 985
9.837 986
9.837 987
9.837 988
9.837 989
9.837 991
Both models are well suited for incubations that require exactly reproducible
GFL
temperatures in development and research laboratory applications.
Mini Incubator 4010: also suitable for warming and drying of samples.
Mini Tube Roller Incubator 4020: also suitable for hybridisations that require exactly reproducible temperatures.
Compact, little space required for versatile applications directly on the workbench. Lift-up, transparent acrylic, covers
permit a clear view of the cultures in the interior cabinet. The units bear the CE mark.
- microprocessor-controlled temperature regulation, temperature range: approx. 8°C above ambient to +60°C,
temperature variation (temporal): ±0.2°C
- temperature setting and display: digital - LED, in 0.1°C increments
- fan ventilation ensures optimum temperature distribution throughout the cabinet interior
- electronic monitoring of the temperature controller, electronic overtemperature cut-out, with visual alarm at 4°C
above the set value, and electro-mechanical >130°C
- soft-touch keys with clear symbols
- Outer casings made of powder-coated, electrolytically galvanized, sheet steel
- W/D/H (outside): 280/510/280
- Mains supply: 230 V 50/60 Hz/0.3 kW (other are voltages on request)
- Net/gross weight: 4010 9.9/11.8kg, 4020 11.8/13.7kg
Mini Incubator 4010: Perforated tray and bottom tray made of stainless steel.
Mini Tube Roller Incubator 4020: Removable rotisserie, made of stainless steel, to accept hybridisation bottles from
32mm to 76mm dia. (can be placed individually or in pairs, even with different diameters - the outer axles can be
placed into pre-fabricated seats without the use of tools). Even results and high resolutions of the detections even
when in continuous use due to its constant frequency of 12rpm.
Max.
load
Capacity Movement
type
mm kg litres rpm
230 x 310 x 170
230 x 300 x 140
Special hybridisation bottles for Tube Roller Incubator 4020: see Hybridisation Incubator 7601 (accessories).
5
3
12
10
-
rotating
Speed PK Cat. No.
-
12, fixed
1
1
9.535 605
9.535 607