laboratory catalogue - Wenk Lab Tec

GENERAL CATALOGUE 2010/11
1
Temperature controllers, Tempat ® -D
For controlling temperature of heating coils, hotplates, ovens, infrared radiators and water baths. Tempat ® -D has a
10mm high, LED display which can even be seen in dark rooms and allows monitoring of actual temperature at any
time. Set point can be entered via a 3 or 4 figure coding switch with 1°C resolution. Built-in sensor breakdown fuse,
switching interval display and Xp trimmer to adjust variable gain amplification between 0 and 10K. Sensor connection
is via a plug-in socket.
Appropriate temperature sensor can be supplied.
If no temperature sensor is ordered, a loose plug is supplied.
Specifications
Input 230V 50/60 Hz
Switching capacity 2000W, 10 A
Connection, appliance 1.20m long connection cable with impact resistant plug
and earthed schuko socket, other plug-in connections in accordance with Swiss or
French/Belgian standards, for example can be supplied at additional cost.
Housing
Grey, glass fibre reinforced plastic
Dimensions: 188 x 110 x 70 mm
On/off switch via dipole luminous rocker switch
Sensor connection via socket
Contact load Pt100 x 1 and 2 x thermocouple
1 + 3
Accuracy ±1 % from measuring range value
Type Description PK Cat. No.
Pt100
Fe-CuNi
NiCr-Ni
2
0 to 400°C
0 to 600°C
0 to 1200°C
Temperature controllers, Tempat ® -DSI
E & OE.
www.wenk-labtec.com
7. Heating and cooling technology
Heating/Temperature controllers, thermostats
1
1
1
9.725 381
9.725 382
9.725 383
Safety temperature controllers for regulating the temperature of heating coils, hotplates, ovens, infrared radiators and
water baths. with 7 mm high LED display. A coding switch is provided for entering set points. For optimum safety:
Irreversible safety contact breaker with secondary sensor input and dipole switch-off in the event of
overtemperature or sensor malfunction. Visual and audible alarms. Critical temperature values are set using
potentiometer and controlled via the display.
Voltage: 220-235V 50/60 Hz
Switching capacity: max. 2.3 kW
Switching current: max. 10 A
Measuring accuracy: ±1%
Dimensions: 188 x 110 x 70 mm
Weight: 1.1 kg
Type Description PK Cat. No.
Pt100
Fe-CuNi
NiCr-Ni
0 to 400°C
0 to 600°C
0 to 1200°C
Sensors for temperature controllers, Tempat ®
1
1
1
9.725 365
9.725 366
9.725 367
Type Dia. Length PK Cat. No.
mm mm
Sensor Pt 100
2.5 250
1 9.725 378
Sensor Fe-CuNi
1.5 250
1 9.725 394
Sensor NiCr-Ni
1.5 250
1 9.725 395
3
Triac mains voltage regulator, MES2000
MES 2000.
Electronic alternating current adjuster for easy control of resistance power equipment such as hotplates, soldering
irons, light bulbs, infrared radiators, universal motor speed regulators, stirrers etc. With high rating fuse, 2 pin on/off
luminous rocker switch and shielded, fused Schuko socket.
Adjustment 10 to 230 V, fitted with an interference suppressor in accordance with EN standard.
Type Power PK Cat. No.
W
MES2000 1 9.724 952
1
2
3
781