parts identification
parts identification
parts identification
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
70<br />
Step 9<br />
1 1/2"<br />
52<br />
84 85<br />
85<br />
ENTRAPMENT INSET<br />
70<br />
Ladder Assembly<br />
1. Place Left Ladder Leg (84) and Right Ladder Leg (85) on a flat surface with the notches facing up.<br />
Insert 3/8" Hardware (H34) into holes in the Ladder Legs, using a hammer if needed.<br />
2. Center Ladder Steps (70) in notches and attach to Left Ladder Leg (84) and Right Ladder Leg<br />
using #8 Hardware (H155). Ladder Steps (70) should be centered in the notches.<br />
3. Attach Entrapment Board (52) to the BACK SIDE of the Ladder, 1 1/2" up from the top Step on the<br />
Ladder Legs (84) (85) using #8 Hardware (H155).<br />
4. Attach 90 Ladder Brackets (N9) to the Ladder Legs (84) (85) using 3/8" Hardware (H11) (H184)<br />
(H34). DO NOT completely tighten Ladder Bracket Hardware at this time.<br />
H34<br />
28<br />
85<br />
84 85<br />
84<br />
H155<br />
H34<br />
N9<br />
H11<br />
H184<br />
H155<br />
52
Change language