parts identification
parts identification
parts identification
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Step 28<br />
N13<br />
N31<br />
N15<br />
N17<br />
Swing Assembly<br />
1. Open C-Links (N30) and Pear Links (N31).<br />
*NOTE: When closing C-Links & Pear Links, securely tighten using a crescent wrench.<br />
2. Attach two Long Chains (N13) to each Swing Seat (N15) and Half Bucket Swing (N17) using Pear<br />
Links (N31) for the Swing Seat (N15) and C-Links (N30) for the Half Bucket Swing (N17) (as shown in<br />
Inset A).<br />
3. Attach two Short Chains (N12) to Trapeze Bar (N18) using C-Links (N30) (as shown in Inset A).<br />
4. Attach Trapeze Rings (N14) to Trapeze Bar (N18) by connecting C-Links (N30) to both the Trapeze<br />
Bar (N18) and Trapeze Rings (N14) (as shown in Inset B).<br />
*NOTE: When completed, swing assemblies should look as shown in Inset B.<br />
5. Securely close all C-Links (N30) and Pear Links (N31) by tightening with a crescent wrench.<br />
N13<br />
N30<br />
INSET A<br />
INSET B<br />
48<br />
N12<br />
N30<br />
N30<br />
N14<br />
N18