Operating Instructions Manual de instrucciones - Pioneer
Operating Instructions Manual de instrucciones - Pioneer
Operating Instructions Manual de instrucciones - Pioneer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
STANDBY/ON<br />
MULTI COMPACT DISC PLAYER<br />
-DISC<br />
MULTI CD<br />
DISC TRACK MIN SEC<br />
EJECT REPEAT PROGRAM DISC TRACK/MANUAL<br />
RANDOM<br />
HI–LITE<br />
STOP PLAY/PAUSE<br />
1-BIT•DLC DIRECT LINEAR CONVERSION<br />
TO PLAY ONLY DESIRED TRACKS/DISCS<br />
1<br />
2<br />
PROGRAM<br />
DISC<br />
6<br />
'<br />
0 41 ¡ ¢<br />
1,4<br />
2 3 6<br />
(PD-M427 only)<br />
PROGRAM<br />
(PD-M427 only)<br />
7 6<br />
DISC 1 DISC 2 DISC 3<br />
DISC 4 DISC 5<br />
DISC 6<br />
PROGRAM PLAYBACK - TO PROGRAM<br />
TRACKS/DISCS IN DESIRED ORDER<br />
1. With the player stopped, press the PROGRAM<br />
button, so that the PROGRAM indicator lights.<br />
2. Use the DISC button or one of the DISC NUMBER<br />
(DISC 1-DISC 6) buttons to select the <strong>de</strong>sired disc<br />
number.<br />
The selected disc number will be displayed.<br />
3. Then, press the 4 1 or ¡¢ button to<br />
select the <strong>de</strong>sired track.<br />
The selected track number will be displayed.<br />
4. Finally press the PROGRAM button, or wait for<br />
about two seconds; the program will be stored in<br />
memory.<br />
If the PROGRAM button is pressed after selecting only<br />
the disc number, the "AL" indicator will appear, indicating<br />
selection of the "Disc All Program" mo<strong>de</strong> (the entire<br />
contents of the disc is entered into the program as a single<br />
step).<br />
While the "AL" indicator is displayed, however, if the 4<br />
1 or ¡¢ button is used to <strong>de</strong>signate a track number<br />
and the PROGRAM button is then pressed (or after two<br />
seconds elapses), the selected track will be stored as that<br />
program step.<br />
5. Repeat steps 2, 3 and 4 to program other tracks.<br />
6. Press the 6 button.<br />
The tracks are played in the programmed or<strong>de</strong>r. When all<br />
programmed tracks have been played, the player enters<br />
stop mo<strong>de</strong>.<br />
English<br />
3<br />
TRACK/MANUAL<br />
41 ¡¢<br />
(PD-M427 only)<br />
4 ¢<br />
NOTE:<br />
When a track is selected with the 4 1 or ¡ ¢ button<br />
in step 3, the displayed track number is automatically<br />
programmed if the 4 1 or ¡ ¢ button is not pressed<br />
within 2 seconds. Therefore, be sure to press the 4 1 or<br />
¡ ¢ button sequentially until the <strong>de</strong>sired track number<br />
appears on the display.<br />
To stop Program playback, press the 7 button.<br />
4<br />
PROGRAM<br />
PROGRAM<br />
To exit program mo<strong>de</strong>:<br />
During program playback, select a DISC number with the<br />
DISC NUMBER button and then press the 6 button. The<br />
player enters normal playback mo<strong>de</strong> and playback starts from<br />
the beginning of the selected disc.<br />
6<br />
PLAY/PAUSE<br />
6<br />
(PD-M427 only)<br />
3<br />
÷ Programs containing up to 32 steps can be created.<br />
÷ To go to the previous or next step in a program, press the<br />
4 1 or ¡ ¢ button.<br />
÷ If the magazine is in the player, the program contents will<br />
not be erased even if the power is turned off.<br />
NOTE:<br />
During Delete programming the PROGRAM button cannot<br />
be operated.<br />
11<br />
En