Template BA B168xH238 - Hörmann

ENGLISH
13
Overview of DIL Switch Functions
DIL A DIL B Function Option relay function
OFF ON CLOSE limit switch reporting activated The relay picks up in the CLOSE end-of-travel
position (CLOSE reporting function)
ON OFF Pre-warning time activated Relay clocks rapidly during the pre-warning
time and normally during the door run (warning
lamp function)
OFF OFF External light activated Relay the same as operator light (external light
function)
DIL A DIL B DIL D Function Option relay function
ON ON ON Automatic timed closing activated,
photocell must be installed
Relay clocks rapidly during the
pre‐warning time, normally during the
travel phase and has permanent contact
during the hold-open phase
DIL C
ON
OFF
Door type
Up-and-over door, long soft-stop ramp-down phase
Sectional door, short soft-stop ramp-down phase
DIL D
ON
OFF
Photocell
Photocell is activated, after triggering the photocell, the door reverses to the OPEN end-of-travel position
(automatic timed closing is only possible with a photocell)
Photocell not activated (automatic timed closing not possible)
DIL E
ON
OFF
Stop circuit with self testing
Wicket door contact with self-testing activated. The self-testing is checked before each door run
(operation only possible with a wicket door contact that can be tested)
Safety device without self-testing
DIL F
ON
OFF
Door maintenance display
Activated, exceeding the maintenance cycle is signalled by the operator light flashing at the end of every
door run
Not activated, no signal after the maintenance cycle is exceeded
TR10A033-E RE / 03.2010 37