Ultrasonic flow sensor - Hachflow

C A U T I O NIndicates a potentially hazardous situation that may result in minor or moderateinjury.N O T I C EIndicates a situation which, if not avoided, may cause damage to the instrument.Information that requires special emphasis.Precautionary labelsRead all labels and tags attached to the instrument. Personal injury ordamage to the instrument could occur if not observed. A symbol on theinstrument is referenced in the manual with a precautionary statement.This symbol, if noted on the instrument, references the instructionmanual for operation and/or safety information.This symbol, when noted on a product enclosure or barrier, indicatesthat a risk of electrical shock and/or electrocution exists.Delicate internal electronic components can be damaged by staticelectricity, resulting in degraded performance or eventual failure.To use the sensor with other controllers, refer to the user manual for thecontroller that is used.InstallationW A R N I N GPersonal injury hazard. Only qualified personnel should conduct the tasksdescribed in this section of the manual.MountingD A N G E RExplosion hazard. The sensor is not approved for use in hazardous locations.W A R N I N GPersonal injury hazard. Always consider the temperature and pressure rating ofthe mounting hardware that is used to install the sensor. The hardware materialusually limits the temperature and pressure rating of the system.For examples of sensor mounting hardware and applications, refer toFigure 1, Figure 2 and Figure 3. The sensor must be calibrated beforeuse. Refer to Calibrate the sensor on page 12.Electrical equipment marked with this symbol may not be disposed ofin European public disposal systems after 12 August of 2005. Inconformity with European local and national regulations (EU Directive2002/98/EC), European electrical equipment users must now returnold or end-of-life equipment to the Producer for disposal at no chargeto the user.Note: For return for recycling, please contact the equipment producer or supplierfor instructions on how to return end-of-life equipment, producer-suppliedelectrical accessories, and all auxillary items for proper disposal.Product overviewThis sensor is designed to work with a controller for data collection andoperation. Multiple controllers can be used with this sensor. Thisdocument assumes sensor installation and use with an sc200 controller.4 English