Introduction to this Online User's Guide - Sprint

Using Voice-Activated DialingIn addition to Voice Command SM (see page 177), you can use a Voice Dialtag to automatically dial a phone number stored in your PCS Phone.Your phone can store up to 20 Voice Dial tags.To use a Voice Dial tag to call a phone number:1. From the Standby mode, press T.2. Follow the voice prompts, and recite the entry’s Voice Dial tag into yourphone’s microphone.Programming Voice Dial Tag to Your PhoneYou can program up to 20 Voice Dial tags.To program a voice dial tag:1. From the Standby mode, press Menu to display the main menu.2. Highlight Voice Services and press OK .3. Highlight Voice Dial and press OK .4. Highlight Program and press OK .5. The phone will prompt you to say the name you want to program.Wait for the beep and then say the name.6. Respond to the prompt by repeating the name after the beep.7. Enter a phone number and press Save .Note: Record Voice Dial tags in a quiet environment and without the aidof an accessory.Section 2: Understanding Your Phone116 2I: Using Your Phone’s Voice Services