Introduction to this Online User's Guide - Sprint

POP3 Server Address: Enter the server address for the POP3 server.POP3 Server Account: Enter the POP3 server account name.POP3 Server Password: Enter your POP3 server password.APOP Auth: Specify whether APOP authentication is ON or OFF whenyou receive e-mail.SMTP Server Address: Enter the server address for the SMTP server.Authentication: Specify whether SMTP authentication is ON or OFFwhen you send e-mail.SMTP Server Account: Enter the SMTP server account name (onlywhen Authentication is set to ON).SMTP Server Password: Enter your SMTP server password (onlywhen Authentication is set to ON).Sender Email Address: Enter your e-mail address and press Save .8. Highlight Yes and press OK .Tip: Press E to exit the Email Menu and return to the Standby screen.Changing the Server SettingsAs well as the settings you specified when you first registered, you can alsoset your sender name and signature.To change the server settings:1. From the Standby mode, press Menu to display the main menu.2. Highlight Email and press OK .3. Highlight Settings and press OK .4. Highlight Server and press OK .5. Highlight the server with the settings you want to change and pressEdit .6. Highlight the setting you want to change and press OK .Setting Name: Changes the server name.Section 2: Understanding Your Phone2J: E-mail121