Introduction to this Online User's Guide - Sprint

Net GuardWhen first connecting to the Internet, the Net Guard will appear toconfirm that you want to connect. It helps you avoid accidentalconnections. You can avoid the Net Guard in the future by selectingAlways auto-connect when the Net Guard appears.To change your Net Guard settings:1. From the Standby mode, press the center of the cursor key to displaythe top menu.2. Select the Settings icon and press OK .3. Highlight Internet and press OK .4. Highlight Net Guard and press OK .5. Highlight ON or OFF and press OK .On to make the Net Guard appear when connecting to the Internet.Off to avoid the Net Guard when connecting to the Internet.Note: When On, the Net Guard will appear only once per session. TheNet Guard does not appear if the phone is merely re-connecting due to atime-out.Browsing the WebBrowsing the Web is easy once you’ve learned a few basics. Here are sometips for browsing the Web with PCS Vision:Soft KeysWhen browsing the Web, the bottom line of your phone’s display containsone or two softkeys. These are shortcut controls for navigating around theWeb, and they correspond to the buttons directly below the phone’sdisplay screen. Depending on what Web sites you visit, the labels on thesoftkeys may change to indicate their function.To activate a Soft Key: Press the Soft Key (left/right), which corresponds to the Soft Key thatappears on the bottom line of your phone’s display screen.Section 3: Using PCS Service Features3B: PCS Vision153