Introduction to this Online User's Guide - Sprint

5. Highlight Receiver and press OK .6. Move the cursor key upward or downward to select your desired volumelevel and press OK .Tip: You can change the receiver volume during a conversation, bymoving the cursor key upward or downward.Ringer TypesRinger types help you identify incoming calls and messages. You canassign ringer types to individual phone book entries (See “Adding a NewInternal Phone Book Entry” on page 79), types of calls and types ofmessages.Note: Ringer type settings can be set independently in the Environmentand Normal mode, and are not available in the Silent All mode.Tip: Ringers can be downloaded right to your phone. (See “Ringers” onpage 169.)Selecting Ringer Types for Voice CallsYour PCS Phone provides a variety of ringer options which allow you tocustomize your ring.To select a ringer type for voice calls so you recognize when a certain typeof call is coming in by the ringer:1. From the Standby mode, press the center of the cursor key to displaythe top menu.2. Select the Settings icon and press OK .3. Highlight Sounds and press OK .4. Highlight Ringer Type and press OK .5. Highlight Voice Calls and press OK .6. Highlight one of items within with Caller ID, No Caller ID orRoaming.7. Press OK .Section 2: Understanding Your Phone34 2B: Changing Your Phone’s Settings