dB - Operator's Manual - John Deere

14 EN
➤ Mechanical drive models:
11. Clutch / brake pedal
This pedal has a double function - during the first part of its travel it acts as a clutch,
engaging and disengaging drive to the wheels, and in the second part it acts as a
brake on the rear wheels.
It is important not to take too long in using the clutch as this can cause overheating
and damage the transmission belt.
NOTE
pedal.
12. Speed change
lever
This lever has seven
positions for the 5 forward
speeds, the neutral
position «N», and
reverse «R». To go from
one speed to another,
press the pedal (11) half
way and move the lever
as per the indications
on the label.
! WARNING!
Reverse must only be
engaged when the
machine is stopped.
➤ Hydrostatic drive models:
21. Brake pedal
COMMANDS AND CONTROL INSTRUMENTS
When the machine is in movement, keep your foot off the
In hydrostatically driven models this pedal is solely for braking and works on the
rear wheels.
11
R
N
12
1 2 3 4 5