Technische Info 2006 - Blaupunkt
Technische Info 2006 - Blaupunkt
Technische Info 2006 - Blaupunkt
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
How to measure mode switch on BP7/BP7VA<br />
Equipment needed:<br />
Test adaptor with VCC and VUC acc. specifi cation of BP7<br />
DSO = Digital storage oscilloscope (sampling rate 100MS/s)<br />
How to proceed:<br />
Connect the signal ‚L_START‘ from the drive pcb (at measuring point or test adaptor) to the DSO.<br />
The following set up of the DSO is recommended:<br />
- VERT: 1V/DIV<br />
- HOR: 1ms/DIV<br />
- TRIG.Level: 1V; TRIG. Mode: Normal; TRIG. Edge: + and -<br />
How to decide PASS or FAIL:<br />
>3,5V<br />