arenal grigio chiaro - AZ :: ABITARE CON STILE :: Ceramiche ...
arenal grigio chiaro - AZ :: ABITARE CON STILE :: Ceramiche ...
arenal grigio chiaro - AZ :: ABITARE CON STILE :: Ceramiche ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ARREDOSIL<br />
COLOURLESS SILI<strong>CON</strong> IMPREGNATING AGENT IN WATERY SOLUTION<br />
FOR THE WATER-REPELLENT PROTECTION OF RE<strong>CON</strong>STRUCTED STONE<br />
FLOORINGS AND FACINGS.<br />
308<br />
DESCRIPTION:<br />
ARREDOSIL is a colourless water-based silicon impregnating agent, with high penetration<br />
and exceptional water-repellent properties, durable long-term effectiveness. ARREDOSIL<br />
is characterized by a good impregnating power on all porous materials commonly used in<br />
building. ARREDOSIL does not form a film coating, therefore it does not change the vapor<br />
permeability.<br />
USE:<br />
ARREDOSIL is used for invisible protective treatments against beating rain on reconstructed<br />
stone facings and floorings, concrete surfaces, cement plasters, facing bricks, cellular concrete,<br />
porous natural stones etc. The application of ARREDOSIL offers the following benefits:<br />
- higher resistance of reconstructed stone floorings and facings to freeze/ thaw cycles;<br />
- protection against the infiltration of rainwater, even in microcracks up to 0,3mm wide;<br />
- protection against the carbonation of concrete surfaces;<br />
- protection against salty air in seacoast areas;<br />
- protection against acid rains and atmospheric agents in general;<br />
- self-washing walls, making dirt slide off instead of clinging;<br />
- elimination of efflorescence;<br />
- no aesthetic alteration of the treated surface;<br />
- no film formation, thus letting the masonry breathe.<br />
PREPARATION OF SUBSTRATE:<br />
the reconstructed stone facing, flooring or all the substrates to be impregnated must be<br />
clean, grease free, and dry, in order to guarantee the maximum penetration of the product.<br />
Wait for the surface to be totally dry before applying ARREDOSIL.<br />
APPLICATION OF PRODUCT:<br />
ARREDOSIL is ready to use and can be applied by brush, roll, or low-pressure airless<br />
equipment. Spread the product uniformly, in one coat, until the substrate is completely<br />
saturated avoiding dripping or leakage. The duration of the water-repellent effect depends<br />
considerably on the depth of penetration of the impregnating agent. On the average, we<br />
recommend reapeating the treatment at 5-to-10-year intervals. On very compact or darkcoloured<br />
substrate, carry out a preliminary test before starting apllication in order to<br />
evaluate the absorption and avoid colour and shade variations.<br />
<strong>CON</strong>SUMPTION:<br />
0,20-0,50 kg/m 2 , depending on the porosity of substrate.<br />
PACKAGING:<br />
ARREDOSIL is packed in 5-liter plastic drums and 1-liter plastic bottles in boxes of 20<br />
pieces. Store the product in a dry, sheltered place in originally, tightly closed containers,<br />
at temperature between +5 °C and +30 °C. In these conditions, its characteristics remain<br />
unaltered for at least 12 months.<br />
WARNINGS:<br />
all tools used for the application of ARREDOSIL may be washed with water before its hardening.<br />
For further information or for particular use, contact our Technical Assistance Service.<br />
SPECIFICATIONS:<br />
colourless water-repellent protective treatment for reconstructed stone walls and floors,<br />
using a product consisting of siloxane resins in watery solution (such as ARREDOSIL of<br />
COLMEF brand PIETRE D’ARREDO), to be applied by brush, roller, or low-pressure<br />
air-less equipment. The treated surfaces will not undergo any aesthetic alteration and will<br />
remain breathable.<br />
TECHNICAL DATA:<br />
appearance:<br />
liquid<br />
colour:<br />
transparent<br />
specific weight (g/cm3): 1.03<br />
dry residue: 9%<br />
pH: 10<br />
flammability:<br />
no<br />
initial drying time:<br />
1 hour<br />
complete drying time:<br />
7 days<br />
application temperature:<br />
from +5°C to +35°C<br />
harmfulness according to ECM 88/379:<br />
no<br />
Tests performed at 23°C – R.H. 50% in the absence of air ventilation<br />
SAFETY INSTRUCTIONS:<br />
the product contains no solvents, therefore it is neither flammable nor harmful. Use protective<br />
gloves and goggles.<br />
FOR PROFESSIONAL USE<br />
The information contained in this data sheet is based on our practical and technical<br />
experience. Since the work site conditions and methods of use of the product are beyond our<br />
control, the data contained herein are for information only and we expressly disclaim any<br />
liability for them. We recommend to test the product’s suitability for a particular purpose<br />
by carrying out preliminary tests.