ELFO SPACE WALL - Delta-Temp

INSTALLING MOUNTING PLATEA. Brick or Concrete Wall1. Place the mounting plate flush against the wall making sure it is horizontal, then trace out the holes to be drilled.2. Drill holes, insert screw plugs to which the mounting plate can be secured.3. Before fixing screws tightly make a final check to make sure plate is horizontal.B. Wooden Wall1. Secure the mounting plate to the beams to prevent vibration.2. If there is no beam, then you can only secure the mounting plate with more screws to add strength.3. Use the accompanying screws to secure the plate, but make sure the plate is horizontal before securing it.4. After securing the plate, pull it to see whether it is strong enough to hold the unit in place.1. First connect the water piping and the drain pipe to the connection at the back of the unit, then install the unit to themounting as shown.2. After hanging the unit, press it to the mounting plate (after installing it pull it towards yourself making sure it is properly inplace and secured).42 M2NW60E5-04