ELFO SPACE WALL - Delta-Temp

AIR PURGIN1. After connecting the water inlet and outlet pipes to the main supply lines, turn on the main breaker and operate the unit inCOOLING mode.2. Open the water inlet valve and flood the coil.3. Check all connections for water leakage, if no leak is found open the purging valve by using hand support the unit with anopen end wrench (No.10). Then purge the air trapped inside the coil. When performing this, take care not to touch theelectrical parts.4. Close the purging valve when no bubbles appear.5. Open the water outlet valve.1. After removing the front cover, connect the field wiring.WIRING CONNECTIONS2. Length of connection cable insulation to be removed.3. Insert the connecting cable fully into the block and secure it by screw tightly.4. Secure the connecting cable.Caution- Be sure to turn off the main power supply before opening the lift up cover for servicing.- Always refer to the wiring diagrams supplied.- Check local electrical codes and also any specific wiring codes.44 M2NW60E5-04