Views
2 weeks ago

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

Sony FDR-X1000VR - FDR-X1000VR Manuel d'aide Anglais

If you select [WATER],

If you select [WATER], you cannot set the white balance. Dive Door (AKA-DDX1(sold separately)) is required for underwater shooting. (FDR- X1000V only) Underwater Housing (MPK-AS3(sold separately)) is required for underwater shooting. (HDR-AS200V only) [30] How to use Changing the Settings Shooting settings White balance You can adjust the color balance to the recording environment. 1. Press the NEXT button or PREV button to select [SETUP] - [WB], then press the ENTER button. 2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button. AWB: Adjusts the white balance automatically so that the colors appear natural. CTEMP: Adjusts for the color temperature of the light source (from 2500K to 9900K). CUSTM: Uses the setting acquired in C.SET. C.SET: Acquires the base white color for shooting under the light source. Place a white reference object under the same lighting conditions as the subject and press the REC/ENTER button. BACK: Returns to the [WB] menu.

Note If you set [SCENE] to [WATER], you cannot set the white balance. [31] How to use Changing the Settings Shooting settings AE shift You can adjust the exposure according to your preference. 1. Press the NEXT button or PREV button to select [SETUP] - [AESFT], then press the ENTER button. 2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button. 0.0: Does not use the AE shift. +0.3: Uses the AE shift (Set +0.3EV for example). Select the preset value on this unit, then press the ENTER button. BACK: Returns to the [AESFT] menu. [32] How to use Changing the Settings Shooting settings Color mode You can change the image color tone when shooting movie/loop recording/Live streaming. 1. Press the NEXT button or PREV button to select [SETUP] - [COLOR], then press the