2j - Gilera Bi4
2j - Gilera Bi4
2j - Gilera Bi4
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DRIVE CHAIN<br />
Maintenance<br />
The duration of the drive chain depends on proper lubrication and<br />
adjustment. lf these are overlooked, the pinion and sproket can be<br />
worn and damaged, greatly compromising cycle performance.<br />
The chain should be checked each time before starting off and<br />
adjusted every 2000 km .<br />
lf the motorcycle is subjected to continuai stress or used in dusty<br />
areas, the maintenance must be done more frequently.<br />
Checking<br />
This operation must be performed with the vehicle unloaded, vertically<br />
erect and must be repeated with the wheel in ditferent positions,<br />
to make sure there are no pronounced eccentricities in the<br />
sproket. With the chain-stretcher shoe excluded, the lower run of the<br />
chain should flex 20 + 25 mm. at a point halfway betweeb sprocket<br />
and pinion.<br />
lf the chain loosens up or catches, lt is due to some damaged or<br />
seized links. Also check the wear of pinion and sprocket and<br />
replace the three parts if necessary.<br />
67