Views
3 months ago

Sony DSC-TX9 - DSC-TX9 Istruzioni per l'uso Inglese

Sony DSC-TX9 - DSC-TX9 Istruzioni per l'uso Inglese

Functions you can use in

Functions you can use in Scene Selection For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera. indicates settings that can be changed, while – indicates settings that cannot be changed. For “Flash” and “Self-Timer,” the icons indicate modes that are available. Some functions are not available, depending on the Scene Selection mode. Table of contents Flash — — — — — — Self-Timer Smile Shutter — — — — — — — — — Burst Settings — — — — — — — — — Close Focus — — — — — — — — — — — — EV — ISO — — — — — — — — — — — — — — — White Balance — — * 1 — — — * 1 * 1 — — — * 2 — Focus — — — — — — — — — — — — — — — Metering Mode — — — — — — — — — — — — — — Soft Skin Effect * 3 — — — — — — — — — — — — Face Detection * 4 * 4 — — — — — — Anti Blink — — — — — — — — — — — — — — * 1 [Flash] for [White Balance] cannot be selected. * 2 You can use [Underwater White Balance] instead of [White Balance]. * 3 [Off] for [Soft Skin Effect] is not available. * 4 [When touched] for [Face Detection] cannot be selected. Operation Search MENU/Settings Search Index 38 GB

Underwater iSweep Panorama When the camera is installed in a housing (such as the Marine Pack), the camera takes multiple shots during a sweep, and allows you to create a panoramic image from composite images. The camera also automatically detects people’s faces or moving subjects. Table of contents 1 Lower the lens cover to switch to shooting mode. 2 t (Settings) t (Main Settings) t [Housing] t [On] 3 Put the camera in the housing. 4 (REC Mode) t (Underwater iSweep Panorama) 5 Align the camera with the end of the subject to be shot and press the shutter button. 6 Pan the camera to the end of the guide, following the indication on the LCD screen. Guidance bar This part will not be taken Operation Search MENU/Settings Search Index Notes • If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the composite image. If this happens, move the camera faster to record a full panoramic image. • Since several images are stitched together, the stitched part will not be recorded smoothly. • Under low light conditions, panoramic images may be blurred or the shooting may not be successful. • Under lights that flicker, the brightness or color of the combined image will not always be the same. • When the whole angle of panoramic shooting and the AE/AF locked angle are very different in brightness, color and focus, the shooting will not be successful. If this happens, change AE/AF locked angle and shoot again. • Underwater iSweep Panorama is not suitable for the following situations: – When objects are too close to the camera – Images with little contrast – Images with constant change • You cannot create panoramic images in the following situations: – You pan the camera too quickly or too slowly. – There is too much camera shake. 39 GB