Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115

Manufacturer:
Hailo Wind Systems GmbH & Co. KG
Daimlerstraße 2, 35708 Haiger, Germany
+49 (0) 2773 82-0
+49 (0) 2773 82-1561
E-Mail: info@ hailo-windsystems.de
Website: www.hailo-windsystems.com
© Hailo-Werk
No part of this publication may be copied, transmitted,
transcribed, saved to a storage medium or translated into
another language or computer language in any way
whatsoever without prior written authorisation from Hailo.
Any breach of copyright might also compromise the product
support provided by Hailo for this device.
Hailo reserves the right to make changes to this manual
and to the product described in it without prior notice. The
content of this manual does not constitute any contractual
or other obligation on the part of Hailo nor is it legally
binding.
These instructions for fi tting and use must be read
carefully and the contents noted before the
universal anchorage point is fi tted or used.
The operator must ensure that these instructions for
fi tting and use are kept to hand at the site of all
vertical ladder systems (or in a suitable location)
and if required make them available to users at all
times.
We have taken the greatest care in preparing this publication.
If, however, you come across any errors or if you have
any suggestions for improvement, please contact Hailo at
the above address.
The original text of this manual is available in German.
If you would like a copy, please submit your request in
writing.
22
Instructions for fitting and use • Universal anchorage point • Revised 2013-11/GB/02