Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115
Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115
Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
9. Inspection<br />
Inspection criteria Inspection schedule Result:<br />
The following points must be observed<br />
and checked each time before<br />
using the anchorage point,<br />
at regular intervals,<br />
after fitting the anchorage point and<br />
following any exceptional events.<br />
Products which are not fully<br />
inspected are no longer covered by the<br />
manufacturer’s product liability after the<br />
warranty has expired.<br />
Complete the inspection schedule<br />
carefully and keep it to hand so that<br />
regular inspections and any maintenance<br />
work can be recorded in it.<br />
1. Check the bolts are securely tightened. When using a liquid<br />
threadlocker, do not retighten the screws<br />
2. Fall arrest device is complete<br />
3. Distortion of supporting parts such as the principle structure<br />
and bolts/screws<br />
4. Signifi cant corrosion<br />
5. Cracks in the supporting parts<br />
6. Legibility of product markings on anchor point<br />
7. Mechanical damage such as signifi cant dents, especially in<br />
areas subject to tensile stress<br />
Date of inspection<br />
Actual/latest date for next inspection<br />
Safety Expert/Engineer/Inspector<br />
Type description<br />
Remarks<br />
Reason of work (Defects fo<strong>und</strong>, Repair)<br />
Series no.<br />
Date fi tted<br />
This page may be copied for use<br />
as a template for future inspections<br />
38<br />
Instructions for fitting and use • <strong>Universal</strong> anchorage point • Revised 2013-11/GB/02
Change language