Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115
Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115
Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
3. Product description<br />
• The fi xed anchorage point is used for working safely<br />
at heights.<br />
• This anchorage point may be used by no more than 2<br />
persons at the same time.<br />
• Users are secured to the large eyelet on the anchorage<br />
point using any means of attachment.<br />
• The CE certifi cation process does not apply to this<br />
anchorage point as it does not constitute an item of<br />
PPE (personal protective equipment) for the purposes of<br />
Directive 89/686/EEC.<br />
• The universal anchorage point is tested to meet the<br />
requirements of the following standards:<br />
EN 795:2012<br />
CEN/TS 16415:2012<br />
OSHA 1910.66<br />
OSHA 1926.502<br />
ANSI Z359.1-2007<br />
The universal anchorage point for up to 2 persons<br />
is designed to take a load of 22.24 kN.<br />
Before fi tting the anchorage point, ensure that the<br />
transfer of forces to the load-bearing structure is<br />
guaranteed with adequate safety.<br />
It might be necessary to obtain the approval of the<br />
designer of the supporting structure or a structural<br />
engineer for the fi tting of the anchorage point.<br />
Each time before it is used, ensure that the<br />
anchorage point is in a visibly so<strong>und</strong> condition<br />
and that there are no striations, evidence of<br />
impact or distortion.<br />
If any irregularities are identifi ed, the anchorage<br />
point must not be used.<br />
Trained personnel then need to investigate<br />
whether it is safe to be used again.<br />
26<br />
Instructions for fitting and use • <strong>Universal</strong> anchorage point • Revised 2013-11/GB/02
Change language