Montage- und Gebrauchsanleitung Universal Anschlagpunkt 115

5. Fitting the universal anchorage point
5.1 General fitting instructions
Permitted load directions
The universal anchorage point may only be
weighted with a load in the prescribed direction.
Select the direction of mounting so that the
universal anchorage point can only act in the
permitted load direction
It is forbidden to:
IMPORTANT:
The operating licence will be revoked and all
warranties on the part of manufacturer
invalidated if this device is not handled in
accordance with these instructions (i.e. improper
assembly or fitting, surface damage, etc.).
• modify the anchorage point in any way, especially by
drilling or grinding
• use an anchorage point which is not in a visibly sound
condition or where it appears to have absorbed the
impact of a fall
• use the anchorage point for a different purpose to
protecting the user from falls from heights
28
Instructions for fitting and use • Universal anchorage point • Revised 2013-11/GB/02