Bedienungsanleitung - Gustav Klauke GmbH

Preface
The present operating instructions are a description for the hand-measuring instrument TC 1 with the following
measuring entries:
- 2 Measuring entries, intended for sensors with normalized,
analogue output signals from 4 to 20 mA:
The measuring channel p is for pressure measuring only.
In the second measuring channel F is for a force sensor.
- 1 RS 232 interface to transfer measured values to the PC resp. to record the data via a printer
using an additional interface converter.
The operation of the TC 1 will certainly not make any difficulties for you, however you can only exploit all features
when you exactly know the appliance.
Should you nevertheless have difficulties with this unit our Klauke ASC's are happy to assist you.
Changes serving the technical progress are made w/o prior notice.
We wish you every success when utilising your Klauke hand-measuring instrument:
TC 1
-26-