Bedienungsanleitung - Gustav Klauke GmbH
Bedienungsanleitung - Gustav Klauke GmbH
Bedienungsanleitung - Gustav Klauke GmbH
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
2.3 Zero point correction<br />
* Zero point correction *<br />
Pay attention!<br />
The sensor must be unloaded.<br />
Prog-> Start<br />
The following notification is shown automatically with the request to subject the<br />
sensor for F or p without a force load resp. pressure load to a zero point<br />
correction.<br />
* * * * * * * PROG * * * * * * *<br />
Prog<br />
Possible zero point deviations are eliminated by pressing the key .<br />
ENT<br />
This is to be seen from a rotating beam which briefly becomes visible in the<br />
notification in order to store the calibration value and the zero point correction.<br />
TF 70<br />
F<br />
F ^<br />
61.8 kN<br />
65.7 kN<br />
Then the return to the normal measuring menu follows.<br />
-35-