Bedienungsanleitung - Gustav Klauke GmbH
Bedienungsanleitung - Gustav Klauke GmbH
Bedienungsanleitung - Gustav Klauke GmbH
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
7. Pin configurations of the TC 1<br />
-45-<br />
Interface-<br />
Exit<br />
RS 232<br />
p<br />
Measuring entries<br />
F<br />
3<br />
3<br />
Electrical<br />
connection scheme<br />
Plan of panel jacks<br />
of device<br />
2 3<br />
1<br />
4<br />
2<br />
1<br />
4<br />
2<br />
5 1<br />
4<br />
5<br />
Panel jacks of device<br />
Attention:<br />
The connection identifiers of the<br />
diverse plug manufacturers are<br />
different. Please keep to our<br />
connecting scheme. .<br />
TF 70<br />
F<br />
F ^<br />
ON<br />
OFF<br />
61.8 kN<br />
65.7 kN<br />
TC 1<br />
SI / US<br />
Jack for external electric tension<br />
supply:<br />
24 V to 30 VDC<br />
Small tension jack<br />
of 2 poles according to DIN<br />
45323<br />
p<br />
Entries RS 232 p F<br />
Pin tying up<br />
(plan)<br />
F<br />
Interface Analogue signal input Analogue signal input<br />
RS 232<br />
4 - 20 mA 4 - 20 mA<br />
2-wire<br />
2-wire<br />
1<br />
2<br />
GND<br />
RXD<br />
Output<br />
Signal - (I-)<br />
Signal - (I-)<br />
(R L<br />
100 Ohm) (R L<br />
100 Ohm)<br />
3<br />
TXD<br />
Clear<br />
Prog<br />
Signal + (I+)<br />
*14,4 VDC<br />
I ENT<br />
out<br />
max. 50 mA<br />
Signal + (I+)<br />
*14,4 VDC<br />
I out<br />
max. 50 mA<br />
4<br />
no connection<br />
N/C<br />
no connection<br />
N/C<br />
5<br />
cable screen<br />
cable screen<br />
Pay attention in case of connecting sensors of other manufacturers:<br />
With the connection of an external electric tension supply e.g. over network adaptor, the supply voltage for the sensors is equal to the network<br />
adaptor tension of 24 VDC (-approx. 1,5 V).<br />
In cases a free external supply voltage is chosen for the measuring device, the electric tension supply for the sensors is lying between 24 V<br />
and 30 VDC (-approx. 1,5 V).