Bedienungsanleitung - Gustav Klauke GmbH

General
The TC 1 of the company Klauke is an efficient hand-measuring device for the measuring of force resp. pressure and
their maximum values.
The TC1 has an internal memory (approx. 15 000 measured values) to record and save the physical data being
measured. This data can be transmitted to a computer via a serial interface.
For recording data on a print media a printer can be connected to our TC 1 by using an interface converter. The
measured data can either be printed out as a chart or as a grapfic.
Rechargeable batteries make the TC 1 independent of an external power source. An external charger is available to
recharge the battery.
The appliance has 2 measuring ports for the connection of sensors with a standardized, analogous output signal from
4 to 20 mA (milli-amps).
Ports of the TC 1
pressure measuring
pressure sensor
type HD
4 to 20 mA
force measuring
force sensor with amplifier
4 to 20 mA
RS 232 interface
p
F
Mains adapter
or
printer port via
interface converter
TF 70
F
F ^
ON
61.8 kN
65.7 kN
TC 1
network adapter 230 VAC
secondary 24 VAC
OFF
SI / US
p
F
Output
Clear
Prog
ENT
-28-