SDM-9220/9230 - Comtech EF Data
SDM-9220/9230 - Comtech EF Data
SDM-9220/9230 - Comtech EF Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.6 Power Supply<br />
Product Description<br />
The power supply is located on the right side when the <strong>SDM</strong>-<strong>9220</strong>/<strong>9230</strong> unit is viewed<br />
from the rear. A different power supply is provided on the UAC and DC units.<br />
NOTE: For information about the factory-supplied power cable and connection to the<br />
power source, turn to “Powering the Unit” on page 4-26.<br />
5.6.1 <strong>SDM</strong>-<strong>9220</strong> UAC and <strong>SDM</strong>-<strong>9230</strong> UAC<br />
• AC power connector<br />
• 1 power switch (1 = ON, 0 = OFF)<br />
• Voltage: Autosensing 100-240 VAC<br />
• Frequency: 50/60 Hz<br />
• Current: 0.8 A at 100 V and 0.4 A at 240 V<br />
• Maximum power consumption: 96 Watts<br />
NOTE: Normal power consumption could be lower when the unit is not fully populated.<br />
5.6.2 <strong>SDM</strong>-<strong>9220</strong> DC and <strong>SDM</strong>-<strong>9230</strong> DC<br />
• DC power connector<br />
• 1 power switch (1 = ON, 0 = OFF)<br />
• Voltage: -48 VDC<br />
• Current: 2 Amps maximum<br />
Memotec Inc. 5-9