CLEANING OF EQUIPMENT FOR OXYGEN SERVICE - AIGA

More documents

Recommendations

Info

KEYWORDS • CLEANING • COMPRESSOR • ENVIRONMENT • MEDICAL • OXYGEN • PIPING SYSTEM • PREVENTION AIGA 012/04 CLEANING OF EQUIPMENT FOR OXYGEN SERVICE Disclaimer All publications of AIGA or bearing AIGA’s name contain information, including Codes of Practice, safety procedures and other technical information that were obtained from sources believed by AIGA to be reliable and/ or based on technical information and experience currently available from members of AIGA and others at the date of the publication. As such, we do not make any representation or warranty nor accept any liability as to the accuracy, completeness or correctness of the information contained in these publications. While AIGA recommends that its members refer to or use its publications, such reference to or use thereof by its members or third parties is purely voluntary and not binding. AIGA or its members make no guarantee of the results and assume no liability or responsibility in connection with the reference to or use of information or suggestions contained in AIGA’s publications. AIGA has no control whatsoever as regards, performance or non performance, misinterpretation, proper or improper use of any information or suggestions contained in AIGA’s publications by any person or entity (including AIGA members) and AIGA expressly disclaims any liability in connection thereto. AIGA’s publications are subject to periodic review and users are cautioned to obtain the latest edition. © AIGA 2004 - AIGA grants permission to reproduce this publication provided the Association is acknowledged as the source ASIA INDUSTRIAL GASES ASSOCIATION 298 Tiong Bahru Road #20-01 Central Plaza Singapore 168730 Tel: +65 62760160 Fax: +65 62749379 Internet: http://www.asiaiga.org
Acknowledgement AIGA 012/04 This document is adopted from the European Industrial Gases Association document IGC 33/97/E ‘Cleaning of equipment for oxygen service’ and acknowledgement and thanks are hereby given to EIGA for permission granted for the use of their document
Page 1: CLEANING OF EQUIPMENT FOR OXYGEN SE
Page 5 and 6: AIGA 012/04 6.4 Acceptance Criteria
Page 7 and 8: 2 AIGA 012/04 The phase-out schedul
Page 9 and 10: - frequently - occasionally 4 AIGA
Page 11 and 12: 6 AIGA 012/04 As a final stage in t
Page 13 and 14: 8 AIGA 012/04 Hydrochloric and nitr
Page 15 and 16: 10 AIGA 012/04 4.2.3.4 Notes on Sol
Page 17 and 18: 12 AIGA 012/04 f) An aqueous cleani
Page 19 and 20: 14 AIGA 012/04 Operators carrying o
Page 21 and 22: 5.1.2 Wire Brushes 16 AIGA 012/04 W
Page 23 and 24: 18 AIGA 012/04 These characteristic
Page 25 and 26: Solvent (trival / common name) CHLO
Page 27 and 28: Table 3: Acid chemical cleaning mat
Page 29 and 30: 6 Inspection methods and acceptance
Page 31 and 32: The amount of contaminants in a sam
Page 33 and 34: 6.4.1 Odour Test 28 AIGA 012/04 If
Page 35 and 36: 30 AIGA 012/04 Cleaned components s
Page 37 and 38: 32 AIGA 012/04 Appendix B: Cleaning
Page 39 and 40: 3.2 Wash Cabins for Manual Cleaning
Page 41 and 42: A) Heating element B) Lifting beam
Page 43 and 44: 38 AIGA 012/04 with flushing / spra
Page 45 and 46: D) Closed cleaner reservoir E) Clea
Page 47 and 48: 42 AIGA 012/04 Emulsified oil can b
Page 49 and 50: 4.4 Post Fabrication Cleaning 44 AI
Page 51 and 52: 46 AIGA 012/04 Appendix D: Detergen
Page 53 and 54:
48 AIGA 012/04 Fig 1. High pressure
Page 55 and 56:
50 AIGA 012/04 Appendix F: Cleaning
Page 57 and 58:
A) Jet tube B) Injection C) Condens
Page 59 and 60:
1. Material / Size Appendix I: Clea
show all

CLEANING OF EQUIPMENT FOR OXYGEN SERVICE - AIGA

Create successful ePaper yourself

Delete template?

Save as template?