Installing Your Wireless Router - upc cablecom

To prepare your router for installation:
1. Carefully peel off the protective film covering both sides of your router (see Figure 1).
Figure 1
2. Set up your wireless router by inserting the tabs of the stand (supplied with your router) into
the slots on the bottom of your router as shown in Figure 2. Then, remove the protective film
covering the status light panel of the router.
Figure 2
3. Place your router in a suitable area for installation (near an AC power outlet and accessible to
the Ethernet cables for your wired computers).
To ensure proper heat dissipation and for router stability, it is important that you
connect the stand and place your router in an upright position.
2 Getting to Know Your Wireless Router