SEALANTS & ADHESIVES - CH Reed Inc.

Automatic Dispense Valve Selection Guide
Service
Manual
306715
Description Replaces
n/a
Air
to Close (6)
Air
to Open
Fluid
Outlet
Fluid
Inlet
Working
Pressure
Part
Number
Valve
Style
tip seal gun, includes tip and
needle.
3/8" npt (m) 3/8" npt (m) 1/4" npsm(m) spring
Stainless steel
205435 3000 psi
210 bar
Standard
Duty
APPLICATORS ❚ SEALANTS AND ADHESIVES EQUIPMENT
3/8" npt (m) 3/8" npt (m) 1/4" npsm(m) spring 205435 with carbide ball and seat n/a
306715
207440 3000 psi
210 bar
3/8" npt (m) 3/8" npt (m) 1/4" npsm(m) spring 205435 without tip and needle n/a
306715
205612 3000 psi
210 bar
1/4" 1/4" orifice 1/8" npt (f) 1/8" npt (f) Snuff-back valve with EPDM seals n/a
n/a
C27130 2400 psi
165 bar
12000
Series
1/4" 1/4" orifice 1/8" npt (f) 1/8" npt (f) Snuff-back valve with Viton seals n/a
n/a
C27134 2400 psi
165 bar
1/4" 1/4" or flange 1/8" npt (f) spring Base seal valve n/a
n/a
C27151 2400 psi
165 bar
1/4" 1/4" or flange 1/8" npt (f) 1/8" npt (f) Larger inlet n/a
n/a
C27340 2400 psi
165 bar
1/4" .093 in orifice 1/8" npt (f) spring Tip seal gun, includes nozzle n/a
n/a
C27142 2400 psi
165 bar
Notes:
(1) EnDure and AutoPlus valves are used with mounting manifold, which includes all fluid and electrical connections.
Mounting manifold for AutoPlus valve is 244930. EnDure valves are shipped with mounting manifold. See Graco
instruction manual 309376 for details.
(2) Base valve (fluid and air section) for these models is 244535
(3) Base valve for these models is 244907
(4) Base valve for these models is 244937
(5) Maximum outlet pressure for Ultra-Lite valves is 2000 psi. Using above these pressures could cause premature
needle/seat failure. See Graco manual 308876.
GRACO
(6) Valves marked with * in this column have redundant spring closure. If air supply is lost valve will close.
101
2