SEALANTS & ADHESIVES - CH Reed Inc.

APPLICATORS ❚ SEALANTS AND ADHESIVES EQUIPMENT
1K Ultra-Lite
Precision Dispense Valve for Quality Bead Laying
Dimensions
6.13 in
(155.7 mm)
1.75 in
(44.45 mm)
0.88 in
(22.35 mm)
1.75 in
(44.45 mm)
3.5 in
(88.9 mm)
5 in
(127 mm)
2.25 in
(57.15 mm)
1 in
(25.4 mm)
1.63 in
(41.4 mm)
1/4-20 x 1/2 in mounting
holes, 2 sides
Technical Specifications
GRACO
1.42 in
(36.07 mm)
2.25 in
(57.15 mm)
Direct Mount
Solenoid
(optional)
Maximum fluid outlet pressure . . .4000 psi (276 bar; 27.6 MPa)
Fluid viscosity range . . . . . . . . . . . . . . . . . . . . 20 to 1 million cps
Maximum cylinder air pressure . . . .120 psi (8.4 bar; 0.84 MPa)
Fluid inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)
Fluid outlet size . . . . . . . . . . . . . . . 1/4 npt(f) and 3/4-16 unf(m)
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 npt(f)
Shaft sealing fluid section . . . . . . . dual seal isolation chambers
with Zirk fittings
Air cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . divorced
Wetted materials
Aluminum . . . . . . . . . . . . . . Aluminum, 303 SST, 17-4 ph SST,
C2 carbide, hard chrome, ethylene propylene,
Parker Polymite, PTFE, SST 303 SST, 17-4 ph SST,
C2 carbide, hard chrome, ethylene propylene,
Parker Polymite, Du Pont PTFE
Weight
Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 lbs (0.65 kg)
SST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 lbs (0.94 kg)
Handle kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 lb (0.35 kg)
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308876
107
2