Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HOT MELT EQUIPMENT ❚ <strong>SEALANTS</strong> AND <strong>ADHESIVES</strong> EQUIPMENT<br />
Therm-O-Flow Plus 55<br />
55 gal. (200 Liter) Heated Ram<br />
Drum Unloader Options Selection (Code F)<br />
Select up to five options or (N) for none.<br />
Important: Only one option for Codes 5, 6 and 7 may be chosen.<br />
Advanced Pendant Control with 7-Day Timer for Preheating<br />
GRACO<br />
(Code F1) A communication pendant that plugs into the main control box. The unit can then be set to turn on (preheat)<br />
and turn off at specific times for each day of the week. The pendant also allows you to easily set<br />
parameters for all heat zones, such as the set point, alarms, PID values and individual zone on/off control.<br />
Low-Level Kit<br />
(Code F2) An adjustable limit switch is mounted to the drum ram. The switch lights a warning beacon mounted over<br />
the unit when the drum level gets low. Contact terminals are also available in the control box for user<br />
interface.<br />
Pump Inactivity Kit<br />
(Code F3) A proximity switch is mounted on the pump to sense movement. A timer is included in the control box. If<br />
the unit hasn’t been used in the pre-set period of time, the heating circuits will automatically turn off.<br />
Vent Hood Kit<br />
(Code F4) The vent hood kit is a shroud which mounts to the rear of the ram assembly. This shroud extracts fumes<br />
from the hot fluid which may be present when changing drums. (Note: Required exhaust tubing and<br />
exhaust fan not included.)<br />
Drum Clam Shell<br />
(Code F5) This option is a steel shell which clamps around the outside of fiber drums, reinforcing the drums for use on<br />
the drum ram.<br />
Heavy-Duty Drum Clamp<br />
(Code F6) The heavy-duty drum clamp is a 4 in. (101 mm) heavy, steel-hinged band-clamp which centers, supports and<br />
holds the drum during the removal of the ram platen from the drum. (Note: Not recommended for fiber<br />
drums.)<br />
Ram Post Saddle-Type Drum Clamps<br />
(Code F7) These are swivel-type drum clamps that enter the drum when it is slid into place. This option<br />
is also used to assist in drum hold-down with chimed drums.<br />
Crossover Control Selection (Code G)<br />
(Code G) Dual Unloader Crossover Control<br />
Select (1) option when a dual crossover kit is needed or (N) for none. Do not order Code F1<br />
(Pendant) or Code F2 (Low Level Kit) when choosing Code G. They are included with this option.<br />
243<br />
5
Change language